ABB MATERIAL NUMBER · KUC755AE117 TYPE · ACS6000 PHASE-MODULE HARDWARE
ABB 3BHB005243R0117 KUC755AE117 ACS6000 Gate Unit Power Supply
An ABB ACS6000 gate-unit power-supply identity controlled by the complete material number and paired KUC type designation.
Overview
3BHB005243R0117 is the ABB material number paired with type designation KUC755AE117 for an ACS6000 gate unit power supply. ABB system documentation places the gate unit power supply inside the ARU/INU phase-module assembly alongside the IGCT power semiconductor.
This is cabinet-internal medium-voltage drive hardware. Selection must be tied to the project-specific ACS6000 parts list, phase-module identity and ABB service documentation rather than inferred from appearance or from a nearby KUC755 revision.
Specifications
Features
Two-part ABB identity
The material number and KUC type provide independent checks during quotation and receiving.
Phase-module location
ABB diagrams identify the gate unit power supply as part of the converter phase-module hardware.
Revision-specific spare
The R0117 suffix must remain visible instead of being collapsed to the shared 3BHB005243 base.
Engineered-drive dependency
The correct spare depends on the actual ACS6000 project and installed converter section.
About IndustryParts
https://www.industryparts.com/Exact identity before quotation
IndustryParts prepares 3BHB005243R0117 enquiries around the complete manufacturer label, requested quantity and destination. For controlled replacements, include the host-system record, field photographs and configuration evidence that apply to this exact execution.
Applications
ACS6000 inverter unit
Supporting the gate-drive hardware in an engineered INU phase module.
Active rectifier unit
Serving the corresponding gate-unit function where the project design uses an ARU.
Controlled medium-voltage-drive service
Replacing the exact ABB part under the approved de-energization, grounding and commissioning procedure.
Lifecycle
Verify
Record the material label, KUC type, phase-module position and ACS6000 drive serial number.
Make safe
Follow the ABB medium-voltage isolation, grounding and discharge procedure before cabinet access.
Commission
Inspect connections, restore covers and interlocks, then complete ABB-prescribed drive diagnostics and test operation.
FAQ
Is 3BHB005243R0117 the same identity as KUC755AE117?
Yes. The reviewed pairing associates ABB material number 3BHB005243R0117 with KUC755AE117.
Can an R0106 gate unit replace 3BHB005243R0117?
Not from the shared family number alone; the suffix change requires confirmation against the ACS6000 project and ABB service documentation.
What evidence should accompany a 3BHB005243R0117 request?
Send clear labels from the part, phase module and drive, plus the drive serial number, cabinet position and project spare-parts list.
May 3BHB005243R0117 be handled while the ACS6000 is energized?
No. Access belongs under the approved ABB medium-voltage isolation, discharge, grounding and interlock procedure.
What should be documented after fitting 3BHB005243R0117?
Record the installed material number, connection inspection, restored safety covers, clean diagnostics and controlled drive test results.
Send the complete 3BHB005243R0117 label, requested quantity and destination.
