ABB AO562 S500-eCo 4-Channel Analog Output Module
Four configurable voltage or current outputs extend compact AC500-eCo stations with one coordinated analog-output group.
Overview
ABB AO562 is an S500-eCo analog output module for the AC500-eCo platform. It provides four configurable channels, O0 through O3, arranged in one group. Each channel can be assigned to the documented voltage or current ranges, while 13-bit conversion including sign supports both unipolar and bipolar output operation. The module uses a separate removable 11-pin terminal block and is intended for fixed installation rather than hot-swap replacement.
Specs
| Manufacturer | ABB |
|---|---|
| Article Number | 1SAP235300R0000 |
| Product Family | AC500-eCo / S500-eCo |
| Module Type | Analog output module |
| Analog Outputs | 4 configurable channels, O0 to O3 |
| Channel Groups | 1 group |
| Voltage Ranges | 0 to 10 V; -10 to +10 V |
| Current Ranges | 0 to 20 mA; 4 to 20 mA |
| Resolution | 13 bits including sign |
| Terminal System | Separate removable 11-pin terminal block |
| Hot Swap | Not supported |
| Lifecycle | Active |
Features
Functional Highlights
- Provides four software-configurable analog outputs in one compact expansion module.
- Supports both unipolar and bipolar voltage commands.
- Supports 0 to 20 mA and 4 to 20 mA current-output loops.
- Uses 13-bit conversion including sign for the documented output ranges.
- Groups O0 through O3 as one coordinated output group.
- Connects field wiring through a separately ordered removable terminal block.
Exact Product Identity
- Manufacturer: ABB
- Model: AO562
- Product Type: AC500-eCo analog output module
- Status: Active product
Applications
- Compact machinery that needs several analog setpoints from an AC500-eCo controller.
- Speed, pressure or position reference signals for compatible field devices.
- Small process skids using a mixture of voltage and current commands.
- Local S500-eCo expansion where four output channels are sufficient.
- Exact replacement of an installed AO562 with the same article and terminal arrangement.
Lifecycle
- ABB lists article 1SAP235300R0000 in the Active lifecycle phase.
- The removable terminal block is a separate ordering item and must match the installed wiring.
- AO562 is not documented for hot swapping; isolate power and follow the installation procedure.
- Record every channel range and scaling value before module exchange.
- Commission O0 through O3 individually and confirm the controlled device response before returning the machine to service.
FAQ
How many outputs are provided by AO562?
AO562 provides four configurable analog outputs, identified O0 through O3.
Can AO562 generate bipolar voltage?
Yes. ABB documents a -10 to +10 V range in addition to 0 to 10 V.
Which current-output ranges are available on AO562?
The documented ranges are 0 to 20 mA and 4 to 20 mA.
Does AO562 include its field terminal block?
The removable 11-pin terminal block is ordered separately.
May AO562 be replaced while the station is powered?
No. ABB lists AO562 as not hot-swappable, so the approved power-down procedure is required.
What should be restored after an AO562 exchange?
Restore each channel mode, scaling and output behavior, then verify the connected actuator or reference input.
Recommended Models
| ABB 1SNA115930R1300 | Z016.135/01 PRINT-B-MS5.1-IWG4020.3-0/4 | IC200MDL640F |
| 102044-00-48-15-02 DR TSE 060-987-166 | XSRING-2400 | GE SAUXPAB1 |
| 59629 1/5A | HSN-6A | DN33E9HR20 |
| CL-317-619 | EMT6-K | RM-LP55 |
| HE500TIU100C-212 | D-67722, MX-SM-D51-PW | SB-4Z-UN |
| Rex2000 | 520AOD01 1KGT024500R0001 | AV3116DNv1 |
| CFQ-5251 JMA-5200Mk2 | 868 Fu5210 | PBT-PA-BMS-SC3B-XL |
| Ett-6 | KFD0-RSH-1 | CP3 |
| ABB 1SD A066324 | CA44 CA54 | FDR30-24 |
| ST91B | YMCKT-KT 552854-506 | 035 62 SCS |
