PM5032-T-ETH is the transistor-output standard CPU in the ABB AC500-eCo V3 range. Current revision 1 article 1SAP123400R0172 integrates 2 MB memory, one Ethernet interface and onboard 24 V DC I/O.

The CPU has twelve digital inputs, eight 0.5 A transistor outputs and two configurable digital channels. It also provides two option-board slots and a local I/O bus for expansion within the documented station limits.

Manufacturer	ABB
Product Family	AC500-eCo V3
Processor Class	Standard CPU
Model	PM5032-T-ETH
Current Article Number	1SAP123400R0172
Memory	2 MB
Supply Voltage	24 V DC
Digital Inputs	12 channels, 24 V DC
Digital Outputs	8 transistor channels, 24 V DC
Rated Output Current	0.5 A per transistor channel
Configurable Channels	2 digital input/output channels, 24 V DC
Ethernet Interfaces	1
Option-Board Slots	2
Local I/O Expansion	Up to 10 I/O modules on the I/O bus
Fast Output Functions	PWM and PTO functions on designated channels
Lifecycle	Revision 1 article is active

• Runs the AC500-eCo application and coordinates onboard plus expanded process I/O.
• Switches eight 24 V DC transistor output channels with a documented 0.5 A rated current per channel.
• Connects engineering and networked devices through its Ethernet interface.
• Provides designated fast output channels for PWM and PTO tasks supported by the hardware revision.
• Extends the controller through two option-board slots and the AC500-eCo V3 local I/O bus.

• Use 1SAP123400R0172 for the active revision 1 PM5032-T-ETH.
• R0172 requires Automation Builder 2.6.0 or later and CPU/boot firmware V3.6.x or later.
• The R0072 processor is functionally compatible but its supported fast-output capability and firmware context must be recorded.
• Do not substitute PM5032-R-ETH without evaluating relay-versus-transistor output wiring and load behavior.
• Match the TA52xx terminal set, TA51xx option boards and local I/O order to the installed station.

• Compact machine automation using fast 24 V DC transistor outputs.
• Controller stations expanded with up to ten AC500-eCo V3 I/O modules.
• Processes that use PWM or PTO on the designated output channels.
• Ethernet-connected panels requiring two CPU option boards.
• Replacement of a PM5032-T-ETH after the firmware and Automation Builder project are brought to the required level.

What output technology does PM5032-T-ETH use?

It provides eight 24 V DC transistor outputs rated at 0.5 A per channel.

Does the CPU include configurable I/O?

Yes. Two additional 24 V DC channels can be configured as inputs or outputs.

Which article is the active revision?

The active revision 1 article is 1SAP123400R0172.

Are fast motion-oriented outputs available?

Designated transistor channels support PWM and PTO functions within the documented frequency and revision limits.

Can PM5032-R-ETH be wired as a direct replacement?

Not automatically, because the R model uses relay outputs while this T model uses 24 V DC transistor outputs.

What station information should accompany an enquiry?

Provide the article revision, firmware, Automation Builder version, terminal set, option boards, local I/O order and output-load details.