PanelView Plus | 15-inch color touch display module
Allen-Bradley 2711P-RDT15C PanelView Plus Display Module
A 15-inch color TFT touch-display module for compatible PanelView Plus 700–1500 modular terminal assemblies.
BrandAllen-Bradley
Model2711P-RDT15C
Product TypePanelView Plus 1500 Touch Display Module
01
Key Information
2711P-RDT15C is the touch-only display module for the PanelView Plus 1500 modular platform. It provides the operator-facing color TFT panel and analog-resistive touch interface, while a separate compatible logic module supplies the processing, application storage, power and communications.
This catalog number identifies a standard display module with no added display options. It must not be confused with a complete PanelView terminal or with the 2711P-RP8D logic module included elsewhere in this batch.
02
Functions
- Presents the FactoryTalk View Machine Edition application generated by the attached PanelView Plus logic module.
- Accepts operator commands through the analog-resistive touch surface without a physical keypad.
- Provides a standard-aspect color display for alarms, status, trends and machine-control screens defined by the HMI project.
- Allows modular service of the display side while preserving the separately identified logic and communication modules.
- Supports field replacement when the display series, backlight technology and terminal firmware are checked together.
03
Specifications
| Manufacturer | Allen-Bradley |
|---|---|
| Catalog Number | 2711P-RDT15C |
| Product Family | PanelView Plus 700 to 1500 |
| Product Type | 1500 touch display module |
| Display Size | 15 in |
| Display Technology | Color active-matrix TFT LCD |
| Resolution | 1024 x 768 pixels |
| Display Area | 304 x 228 mm |
| Luminance | 300 cd/m² |
| Operator Input | Analog-resistive touch screen |
| Touch Actuation Rating | 1 million presses |
| Touch Operating Force | 10 g |
| Backlight by Display Series | Series C: LED; Series B or earlier: CCFL |
| Front Protection | IP65 |
| Enclosure Ratings | NEMA Type 12, 13 and 4X indoor; IEC IP54 and IP65 |
| Overall Dimensions (W x H x D) | 416 x 330 x 65 mm |
| Panel Cutout | 391 x 305 mm |
| Display Options | None |
| Lifecycle Status | Discontinued |
| Replacement Category | Engineering replacement |
04
Installation
- Remove power from the complete terminal before separating or attaching the display and logic modules.
- Confirm that the host assembly is a compatible PanelView Plus 700–1500 modular terminal and that the display size matches the existing panel opening.
- Inspect the sealing gasket and use the specified mounting hardware so the installed front can maintain its intended enclosure rating.
- Check the series letter on the rear label before choosing the service procedure or replacement part.
- When a Series C LED display replaces an earlier CCFL display module, upgrade the terminal firmware as required before operation.
05
Lifecycle
- Rockwell Automation discontinued 2711P-RDT15C on September 30, 2021 and classifies the transition as an engineering replacement.
- A replacement decision must include the logic module, display series, panel cutout, application firmware and backlight transition rather than the screen diagonal alone.
- Back up the HMI application and record the complete display and logic-module catalog numbers before disassembly.
- If migration changes the terminal generation, verify display resolution, panel mechanics, communication and FactoryTalk View project compatibility.
