Allen-Bradley PN-184930 PowerFlex 755 Main Control Board
A PN-184930 main control board for Allen-Bradley PowerFlex 755 service; verify firmware and assembly revision before exchange.
Overview
PN-184930 is identified as the Allen-Bradley PowerFlex 755 main control board. The board should remain tied to the host drive order number, firmware family, assembly revision and complete barcode.
A visual match is not sufficient for a PowerFlex 755 control assembly. Confirm the installed slot, communication options and parameter-backup plan before approving a replacement or repair enquiry.
Specs
| Manufacturer | Allen-Bradley / Rockwell Automation |
|---|---|
| Model | PN-184930 |
| Product Family | PowerFlex 755 |
| Product Role | Main control board |
| Host Drive | PowerFlex 755; exact frame and order code required |
| Firmware | Record installed firmware and compatibility |
| Assembly Revision | Record board revision and barcode |
| Interfaces | Compare all network, feedback and I/O connectors |
| Condition | State new, tested used, refurbished or repair-return requirement |
| Installation | Use ESD controls and approved service procedure |
Features
- Preserves the PowerFlex 755 main-board identity for installed-base service.
- Separates board revision and firmware compatibility from generic drive ratings.
- Supports tested-spare, repair and lifecycle enquiries.
- Keeps the complete host and connector record with the quoted part.
Applications
- PowerFlex 755 drive repair and control-board exchange.
- Cabinet maintenance where the existing main board is diagnosed as failed.
- Legacy installed-base assessment before drive modernization.
Lifecycle
- Back up parameters and record firmware before board removal.
- Photograph the board barcode, connectors and slot orientation.
- Use ESD packaging and protect edge connectors during transit.
- Perform controlled diagnostics and machine validation after installation.
FAQ
Which PowerFlex data must accompany PN-184930?
Provide the complete drive order number, frame, voltage class, firmware, board revision and cabinet slot.
Can any PowerFlex 755 main board replace PN-184930?
Only an exact or documented compatible revision should be used; network and feedback options can change the control assembly.
What should be checked before removing PN-184930?
Save parameters, capture fault history, label every connector and record the board barcode and installed position.
How should a repaired PN-184930 be accepted?
Verify firmware, diagnostics, communications, feedback, I/O, parameter restore and controlled motor testing under the site procedure.
What condition should be stated in a PN-184930 enquiry?
Specify tested used, refurbished, new old stock or repair-return, including test evidence and warranty expectations.
Recommended Models
| Hager SB399 | 4003 STD CU: F3 PWR: F100 | ABB RXSF1-110-125V RK 271 016-AN |
| P500/161 | MC60-12GM50-1N-V1 | CCH-CS |
| SMC AMP320-F04B | 106234 | Siemens 1PH6103-1NF46-0BN0 |
| 4825-0094 2IN/2OUT | LI64 1031 F00570 | 6SL3203-0CD21-0AA0 |
| P045FB05C0-PB3P | PB-16DI | DO5611TNE968902R2201 |
| RF4012I4PI | Siemens 6SE1222-2AB02 | BW1676 |
| PXC00-U | SB-RGB-250-K-B5 | KP-F31PCL |
| EL3910A8008 | 800033-340SE | IN40-D0304K |
| FX3-XTIO84002 | 3HE15377AARA01 SFP28 25GE ER-LC ROHS6/6-40/85C INUIAG2HAA | Siemens 6FX5012-5DS06-1BA0 |
| DNC-50-265-PPV-A | Krauss Maffei 5080598 MT550 | MK15-12EX0-PN/24VDC/K11 |
