Bently Nevada 102044-00-32-10-02 Legacy Proximity Sensor Assembly
A legacy Bently Nevada proximity-sensor assembly identified by the complete 102044-00-32-10-02 configuration code.
Product Profile
102044-00-32-10-02 is a legacy Bently Nevada proximity-sensor assembly identified by the complete 102044-00-32-10-02 configuration code.
The complete 102044-00-32-10-02 identifier must be used for selection because its suffix distinguishes the installed mechanical, electrical or revision configuration.
Technical Data
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Part Number | 102044-00-32-10-02 |
| Base Part | 102044 |
| Product Category | Legacy proximity sensor hardware |
| Configuration Identity | 00-32-10-02 suffix must be retained |
| Approval Availability | Base part 102044 remains listed in the current country-specific approval guide |
| Selection Requirement | Verify nameplate, probe geometry, connector and matched electronics |
System Role
- Complete legacy part code supports configuration-controlled identification.
- Used within Bently Nevada proximity-measurement hardware.
- Replacement depends on the installed probe geometry and electrical system length.
- Connector and cable arrangement must be read from the installed assembly.
- Base part 102044 remains recognized in current Bently Nevada approval documentation.
Compatibility
- Confirm the exact installed nameplate before selecting a current equivalent.
- Match the probe, cable and Proximitor Sensor as a complete transducer chain.
- Treat the suffix fields as configuration identifiers; do not infer interchangeability from the 102044 base alone.
Applications
- Maintenance of machinery-monitoring installations retaining 102044 proximity hardware.
- Model-controlled spare identification using the complete 00-32-10-02 suffix.
- Replacement engineering where the installed probe and associated electronics can be inspected.
FAQ
What is the exact identity of 102044-00-32-10-02?
102044-00-32-10-02 is a complete legacy Bently Nevada proximity-sensor configuration code.
Can 102044-00-32-10-02 be ordered as base part 102044 only?
No. Retain the complete suffix and provide the installed nameplate for verification.
What must be checked before replacing 102044-00-32-10-02?
Check probe geometry, cable and connector arrangement, total system length and matched Proximitor Sensor.
Is an exact weight listed for 102044-00-32-10-02?
No exact official weight was verified, so no weight is stated for this configuration.
Does the 102044 base remain recognized by Bently Nevada?
Yes. Base part 102044 appears in the current country-specific approval-option guide.
What should be tested after installing 102044-00-32-10-02?
Verify probe gap, static voltage, dynamic response, channel scaling and alarm behavior.
Recommended Models
| J9734A | 902821/80 | 047H0213 |
| QS10.121-73 | BT-F425 | B50M002 |
| CC-5 | 3SE5115-1CA00-1AF2 | 6SL3210-1PE21-8UL0 |
| C40E-1204CF10 | 1LA9166-2LA90Z | DDRC810DT-GL |
| IC5 KM713730G11 | 1LA7156-2AA90-ZN00 | 140XBP01600 |
| 028126 DMX3 | PA-23TAB 80263C 222335.0002 | IWRM 18U95/400068 |
| SG-TL70-A | BRX-8146 90Y4608 | Allen-Bradley 1494U-FC100J 1494U PN-230608 |
| MTL4541A | D642-284 P02KP6D2CNH | 5SL44027RC |
| Siemens SIMOREG 6RA2285-6GV62-0 + 6RA8232-1KB0 | 1FK2105-6AF11-1MA0 | ABB 264HGPRTAB1 |
| MG180MB2-48FF300-H3 | ABB 1SBL371001R8111 A63-30-11 | VIMAR 01471 |
