129525-0050-02 is a Bently Nevada external termination block cable identified for a 50 ft (15 m) configured length. It connects compatible rack I/O hardware to its separately mounted external termination assembly.

The cable is an installation accessory rather than a measuring module. Selection therefore depends on the associated I/O module, external terminal block, connector arrangement and required routing length.

• Provides a 50 ft (15 m) interconnect path between rack I/O and external termination hardware.
• Arrives as an assembled cable configuration.
• Supports separation of field terminal blocks from the rack location.
• Keeps the length code and assembly suffix together in one complete ordering reference.
• Allows panel wiring to remain at the external termination block during rack-side service.

• Match 129525-0050-02 to the documented external termination block and rack I/O module.
• Confirm connector gender, keying and pin assignment at both ends.
• Verify that the 50 ft route fits the enclosure and tray path without exceeding bend limits.
• Do not use an external-termination cable with an internal-termination I/O module.
• Review the complete monitoring or temperature-module assembly before ordering.

• Preserve the full 129525-0050-02 configured cable designation.
• Label both ends and photograph connector orientation before disconnecting the existing cable.
• Inspect connectors, backshells, shielding and the complete cable route.
• Avoid sharp bends, crushing, tension and unsupported spans during installation.
• Complete channel continuity and functional testing after the cable is installed.