Bently Nevada 21000-16-10-06-065-04-02 Aluminum Proximity Probe Housing Assembly
An aluminum 21000 housing assembly ordered with a 3300 XL 8 mm probe, 1.0-metre probe cable, defined penetration code, plug-only fitting and 3/4-14 NPT mounting.
Key Information
21000-16-10-06-065-04-02 belongs to the 21000 all-metal external-mount proximity-probe housing family. The assembly combines a dome cover, conduit ports, probe sleeve, sealing components and a reverse-mount probe arrangement.
The 16 option selects a 3300 XL 8 mm probe and the 10 option specifies a 1.0-metre probe cable. The 04 fitting option provides the plug-only arrangement, while 02 identifies the 3/4-14 NPT mounting thread.
The submitted 06 standoff code and 065 penetration code must remain together exactly as shown on the installed order record. Do not select a replacement from housing appearance alone.
Functions
Protect an externally mounted probe
The metal housing, sleeve and dome cover place the reverse-mount probe in a serviceable external assembly.
Provide conduit entry control
Threaded ports and the selected plug arrangement support the documented cable-entry plan.
Maintain probe adjustment
The sleeve and penetration geometry preserve the installed probe reach and adjustment range.
Specifications
| Manufacturer | Bently Nevada | Exact model | 21000-16-10-06-065-04-02 |
|---|---|---|---|
| Housing family | 21000 | Housing body | Aluminum |
| Sleeve material | 304 stainless steel | Included probe option | 3300 XL 8 mm |
| Probe cable length | 1.0 m (39 in) | Standoff option code | 06 |
| Probe penetration code | 065 | Fitting option | One 3/4-14 NPT plug only |
| Mounting thread | 3/4-14 NPT | Typical housing mass | 1.1 kg (2.4 lb) without fittings |
About IndustryParts
https://www.industryparts.com/Housing geometry is checked before quotation
IndustryParts retains the complete housing string, machine measurements and requested quantity to support an exact mechanical review.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Installation
Measure before removal
Record standoff, penetration, sleeve exposure and target location before loosening the housing.
Preserve the cable path
Photograph the conduit entry, plug position, probe lead and internal connector arrangement.
Match the complete order string
Keep 06 and 065 as submitted rather than converting them from visual estimates.
Verify the finished installation
Check housing security, sealing, probe gap and channel response under the approved procedure.
Lifecycle
- Mechanical custody
- Store the housing code, probe label and machine location as one asset record.
- Long-sleeve review
- Where total sleeve length exceeds 12 inches, use the approved additional support arrangement.
- Replacement boundary
- Treat a 31000 or 32000 housing as a migration decision, not an automatic drop-in spare.
FAQ
What measurements should accompany a 21000-16-10-06-065-04-02 enquiry?
Provide the installed standoff, penetration, sleeve exposure, mounting-thread evidence and clear housing-label photographs.
Can a 24701 stainless housing directly replace 21000-16-10-06-065-04-02?
Material, mass, mounting and approval details differ, so replacement requires an engineering review of the installed housing.
Why must the 06 and 065 codes stay together for 21000-16-10-06-065-04-02?
They form part of the submitted mechanical configuration and should not be reconstructed from appearance after removal.
When does a 21000-16-10-06-065-04-02 sleeve require added support?
The manufacturer calls for additional sleeve support when the selected probe penetration exceeds 12 inches.
What confirms 21000-16-10-06-065-04-02 is ready for service?
Correct mechanical engagement, restored sealing, documented probe gap and a successful channel response test provide acceptance evidence.
Request a model-specific quotation
Send the complete 21000-16-10-06-065-04-02 label, requested quantity, delivery destination and installed-system context.
