Bently Nevada 21504-00-48-10-02 Legacy 8 mm Standard-Mount Proximity Probe
A 8 mm configuration with standard-mount, 3/8-24 unf for non-contact shaft vibration and position measurement.
Key Information
21504-00-48-10-02 is a Bently Nevada legacy 8 mm standard-mount proximity probe identified by its complete configurable part number. It is intended for non-contact shaft vibration and position measurement.
The complete code defines the sensing family and its mechanical and electrical arrangement. Probe diameter, case geometry, cable or system length, connector and approval details must remain together.
Functions
- Provides non-contact eddy-current measurement of a conductive shaft or target.
- Supports non-contact shaft vibration and position measurement.
- Uses the 8 mm configuration defined by 21504-00-48-10-02.
- Carries the documented 1.0 m (39 in) connection arrangement.
- Maintains the exact mechanical fit through standard-mount, 3/8-24 unf.
Specifications
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Part Number | 21504-00-48-10-02 |
| Product Family | 7200 Proximity Transducer System |
| Exact Product Type | Legacy 8 mm Standard-Mount Proximity Probe |
| Probe / Sensor | 8 mm |
| Mechanical Form | Standard-mount, 3/8-24 UNF |
| Standoff / Unthreaded Length | 0.0 in |
| Case / Penetration Length | 4.8 in |
| Cable or System Length | 1.0 m (39 in) |
| Connector / Fittings | Miniature male coaxial connector |
| Protection / Armor | Without armor |
| Measurement Role | Non-contact shaft vibration and position measurement |
| Lifecycle | Legacy / obsolete 7200 component |
Installation
- Verify the full 21504-00-48-10-02 nameplate before disturbing the existing probe loop.
- Confirm case geometry, penetration, mounting thread and available adjustment range.
- Route the cable clear of sharp bends, hot surfaces and electrical interference.
- Keep the probe, extension cable and signal conditioner within the same compatible system family.
- Set the probe gap and validate static and dynamic response before enabling protection logic.
Lifecycle
- 21504-00-48-10-02 is classified as legacy / obsolete 7200 component.
- Keep the full order code, photographs and measured dimensions in the maintenance record.
- Treat any change in probe diameter, cable length, connector, approval or case style as an engineering review.
- For legacy 7200 hardware, assess a complete-loop migration rather than mixing current and legacy components.
FAQ
What exact component is 21504-00-48-10-02?
21504-00-48-10-02 is a legacy 8 mm standard-mount proximity probe in the 7200 Proximity Transducer System.
Which sensing element belongs to 21504-00-48-10-02?
21504-00-48-10-02 is identified with 8 mm; do not substitute a different probe diameter or approval option.
What mechanical details must match 21504-00-48-10-02?
Confirm the standard-mount, 3/8-24 unf, 0.0 in and 4.8 in dimensions of 21504-00-48-10-02.
How is 21504-00-48-10-02 connected?
21504-00-48-10-02 uses miniature male coaxial connector and the documented 1.0 m (39 in) electrical or integrated length.
Can 21504-00-48-10-02 be mixed with another proximity-system family?
No. Keep 21504-00-48-10-02 with the matching probe, cable or Proximitor electronics for its documented 7200 Proximity Transducer System configuration.
What should be verified after installing 21504-00-48-10-02?
Check mounting security, probe gap, cable routing, connector condition, static output and dynamic response before returning the 21504-00-48-10-02 channel to service.
