ARMORED LEAD · 8 MM TIP · 3/8-24 STANDARD MOUNT · 1 M SYSTEM
Bently Nevada 21505-00-44-10-02 7200 Series Armored 8 mm Proximity Probe
A legacy 7200 Series 8 mm probe with stainless-steel cable armor and a suffix-controlled case and connector.
Product Identification
21505-00-44-10-02 is a legacy 7200 Series standard-mount 8 mm proximity probe whose 21505 base denotes stainless-steel cable armor. Its remaining fields identify the case geometry, one-metre total cable and miniature coaxial connector execution.
The armored lead changes handling and routing requirements but does not remove the need to match the calibrated 7200 measurement chain. Extension cable, Proximitor Sensor and total electrical length must remain compatible.
Engineering Data
Functions
Armored cable path
The 21505 base protects the lead where routing requires stainless-steel armor.
Suffix-controlled mechanics
Case geometry remains visible in the 00-44 fields.
One-metre electrical length
The probe-lead code must remain aligned with the rest of the transducer system.
Legacy chain compatibility
The probe operates only as part of the correct 7200 extension-cable and Proximitor combination.
About IndustryParts
https://www.industryparts.com/Exact identity before quotation
IndustryParts prepares 21505-00-44-10-02 enquiries around the complete manufacturer label, requested quantity and destination. For controlled replacements, include the host-system record, field photographs and configuration evidence that apply to this exact execution.
Applications
Protected machine routing
Using armor where the probe lead is exposed to mechanical contact during installation or service.
Shaft displacement monitoring
Measuring supported static or dynamic shaft motion through a complete calibrated chain.
Legacy system maintenance
Keeping exact-case and cable identity for a documented 7200 installation.
Lifecycle
Route
Record armor termination, bend radius, connector path and available extraction clearance.
Connect
Keep connectors clean and finger-tighten only according to the applicable service procedure.
Test
Confirm gap voltage, cable stability and monitor response throughout the expected machine condition.
FAQ
Q01
What is the defining difference of 21505-00-44-10-02?
+
Its 21505 base identifies the armored 8 mm standard-mount probe execution.
Q02
Can 21505-00-44-10-02 replace 21504-000-040-10-02?
+
Not automatically. Armor, case code and mechanical fit differ even though both belong to the legacy 8 mm family.
Q03
Which cable record is needed for 21505-00-44-10-02?
+
Document the one-metre probe lead, any extension cable, total system length and matching Proximitor Sensor.
Q04
How should the armor on 21505-00-44-10-02 be inspected?
+
Check crushing, broken coils, sharp bends, loose termination and evidence that movement transfers load to the connector.
Q05
What acceptance evidence belongs with 21505-00-44-10-02?
+
Record the exact label, installed gap, stable DC value, dynamic waveform and host-monitor alarm test.
Send the complete 21505-00-44-10-02 label, requested quantity and destination.
