Bently Nevada 31000-16-05-00-033-03-02 3300 XL 8 mm Probe Housing Assembly
A stainless proximity-probe housing configured without a standoff adapter and with 3/4-14 NPT mounting.
Product Overview
31000-16-05-00-033-03-02 is a 31000-series proximity probe housing for a 3300 XL 8 mm probe. Code 05 specifies a 0.5 m probe cable, while 00 confirms that no standoff adapter is included.
Penetration code 033 represents 3.3 inches. Fitting code 03 supplies two plugs, a 3/4-14 NPT fitting, a stainless 3/4-14 to 1/2-14 NPT reducer and a cable seal grip with grommets.
The final 02 code selects a 3/4-14 NPT mounting thread. The housing provides external probe access in a corrosion-resistant enclosure rated Type 4X / IP66.
Performance
External probe access
Allows probe adjustment or replacement without opening the bearing housing.
Environmental protection
Provides a corrosion-resistant PPS housing with Type 4X / IP66 protection.
Mechanical positioning
Maintains the specified penetration and threaded mounting relationship.
Cable-entry management
Uses the selected plug, reducer and seal-grip arrangement for the probe lead.
Technical Details
- Manufacturer
- Bently Nevada
- Exact model
- 31000-16-05-00-033-03-02
- Housing series
- 31000
- Probe selection
- 3300 XL 8 mm
- Probe cable length
- 0.5 m
- Standoff adapter
- None
- Probe penetration
- 3.3 in
- Fitting option
- 03
- Included reducer
- 3/4-14 to 1/2-14 NPT stainless steel
- Mounting thread
- 3/4-14 NPT
- Environmental rating
- Type 4X / IP66
- Retaining-nut torque
- 29.4 N·m
- Probe temperature range
- −51 to +177 °C
About IndustryParts
https://www.industryparts.com/Mechanical order fields are checked before dispatch
IndustryParts keeps penetration, mounting thread, cable length and fitting selection with the machine-location evidence for this housing assembly.
System Integration
Confirm mechanical stack-up
Check mounting thread, 3.3-inch penetration, target position and absence of a standoff adapter against the machine drawing.
Seal the cable entry
Use the supplied fittings and grommets to maintain the Type 4X / IP66 enclosure intent.
Set and lock the probe
Adjust the installed gap, torque the retaining nut as specified and verify the connected monitor channel.
Applications
Bearing-housing probe access
Providing an externally serviceable proximity-probe point.
Harsh industrial locations
Protecting the probe termination against dust, water and corrosive exposure.
Fixed penetration installations
Maintaining a 3.3-inch mechanical reach without a standoff adapter.
FAQ
Does 31000-16-05-00-033-03-02 include a standoff adapter?
No. Ordering code 00 specifies no standoff adapter.
What does 033 mean in 31000-16-05-00-033-03-02?
It identifies a 3.3-inch probe penetration, which must match the machine geometry.
Which mounting thread is used by 31000-16-05-00-033-03-02?
The final 02 code selects a 3/4-14 NPT mounting thread.
What is included in fitting option 03 for 31000-16-05-00-033-03-02?
It includes two plugs, a 3/4-14 NPT fitting, a stainless reducer to 1/2-14 NPT and a seal grip with grommets.
How should 31000-16-05-00-033-03-02 be accepted after installation?
Verify mechanical reach, environmental sealing, retaining-nut torque, probe gap and stable monitor-channel response.
