330101-00-08-05-02-05 is a Bently Nevada 3300 XL 8 mm proximity probe with a 3/8-24 UNF threaded case, no cable armor and CSA, ATEX and IECEx approval option 05.

Its geometry combines 0.0 inch unthreaded length with 0.8 inch overall case length. The probe has a 0.5 m total electrical length and a miniature coaxial ClickLoc connector with standard cable.

• Supports a 2 mm linear measurement range within a correctly matched 3300 XL 8 mm system.
• Provides a 7.87 V/mm incremental scale factor with ±5% system tolerance for standard 1 m and 5 m systems.
• Supports 0 to 10 kHz frequency response at +0/-3 dB.
• Uses an approximate -9 Vdc center-gap setting for radial vibration measurements.
• Operates across the standard probe temperature range of -52 to +177 °C.

• Select the extension cable and Proximitor Sensor so the total system length is correct for the monitoring loop.
• Follow the applicable hazardous-area installation drawing for the 05 approval option.
• Maintain target size, shaft diameter and tip separation requirements to preserve system performance.
• Route and protect the unarmored FEP probe cable against abrasion and mechanical loading.
• Reconnect the probe only to a compatible 3300 XL 8 mm system and verify channel scaling.

• Radial vibration measurements on rotating machinery.
• Axial position and thrust-position monitoring.
• Eccentricity and shaft-position measurements.
• Speed and Keyphasor reference sensing.
• Hazardous-area installations covered by the selected 05 approval option and installation conditions.