Bently Nevada 330101-00-32-10-01-00 3300 XL 8 mm Proximity Probe
A 3/8-24 UNF 3300 XL 8 mm probe with a 3.2-inch case, 1.0-metre standard cable and protected ClickLoc connector.
Key Information
330101-00-32-10-01-00 is the unarmored 330101 execution of the 3300 XL 8 mm probe. The ordering string selects zero unthreaded length, a 3.2-inch overall case and a 1.0-metre lead.
The connector option is the miniature coaxial ClickLoc connector with protector on standard cable. The final 00 code means an agency approval option was not requested.
The probe is one component of a complete 3300 XL 8 mm transducer system; the extension cable and Proximitor Sensor must preserve the intended total system length.
Functions
Measure shaft position and vibration
The eddy-current system converts probe-to-target distance into a voltage for static position and dynamic vibration measurements.
Support keyed reference measurements
The 3300 XL 8 mm family also supports Keyphasor reference and speed applications when applied within the approved system.
Maintain component interchangeability
The XL system is designed so approved probes, extension cables and Proximitor Sensors can be interchanged without individual component matching.
Specifications
| Manufacturer | Bently Nevada | Exact model | 330101-00-32-10-01-00 |
|---|---|---|---|
| Probe family | 3300 XL 8 mm | Probe body | 330101, without armor |
| Case thread | 3/8-24 UNF | Unthreaded length | 0.0 in |
| Overall case length | 3.2 in | Total probe length | 1.0 m (3.3 ft) |
| Connector and cable | Protected ClickLoc, standard cable | Agency approval option | Not required |
About IndustryParts
https://www.industryparts.com/Complete transducer-chain records reduce selection risk
IndustryParts keeps the submitted probe identity, installed cable chain and requested quantity together before a quotation is prepared.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Installation
Record the chain
Capture probe, extension-cable and Proximitor Sensor labels before disturbing the installation.
Verify total length
Confirm that probe and extension-cable lengths add to the Proximitor Sensor system length.
Preserve routing
Document the probe gap, connector protection, cable path and bend condition.
Commission as a system
After replacement, verify gap voltage, steady readings and the configured monitor response.
Lifecycle
- Selection record
- Retain the complete six-field order string instead of reducing the spare to the 330101 base number.
- Connection control
- Keep the ClickLoc protector and standard-cable execution visible in the service record.
- Acceptance evidence
- Close work with the matched system length, stable gap and approved channel test.
FAQ
What system labels should accompany a 330101-00-32-10-01-00 enquiry?
Send the complete probe, extension-cable and Proximitor Sensor labels together with the required quantity.
Can a 330102 armored probe replace 330101-00-32-10-01-00 without review?
No. Armor changes the mechanical cable construction, so routing, clearances and the installed service record must be checked.
Why must the 3.2-inch case be retained for 330101-00-32-10-01-00?
The case length controls probe reach and threaded engagement in the existing mounting arrangement.
What should be checked before disconnecting 330101-00-32-10-01-00?
Record the static gap voltage, cable route, connector condition and every component in the transducer chain.
What proves a replacement 330101-00-32-10-01-00 is correctly commissioned?
A matched total system length, correct probe gap, stable channel reading and passed monitor test complete the acceptance record.
Request a model-specific quotation
Send the complete 330101-00-32-10-01-00 label, requested quantity, delivery destination and installed-system context.
