Bently Nevada 330101-00-60-90-01-05 3/8-24 UNF Proximity Probe
A non-armored 3/8-24 UNF 3300 XL 8 mm probe with a 6.0-inch case, 9.0 m lead, connector protector and multiple approvals.
Product Profile
330101-00-60-90-01-05 is a non-armored 3/8-24 UNF 3300 XL 8 mm probe with a 6.0-inch case, 9.0 m lead, connector protector and multiple approvals.
The complete 330101-00-60-90-01-05 identifier must be used for selection because its suffix distinguishes the installed mechanical, electrical or revision configuration.
Technical Data
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Part Number | 330101-00-60-90-01-05 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Probe Construction | 3/8-24 UNF thread; without armor |
| Unthreaded Length | 0.0 in |
| Overall Case Length | 6.0 in |
| Total Probe Length | 9.0 m |
| Connector / Cable | Miniature coaxial ClickLoc with connector protector; standard cable |
| Approval Option | CSA, ATEX and IECEx |
| Probe Tip | Polyphenylene sulfide (PPS) |
| Probe Case | AISI 303 or 304 stainless steel |
| Minimum Cable Bend Radius | 25.4 mm |
System Role
- Non-armored 3/8-24 UNF threaded probe for fixed cable-routing applications.
- Long 9.0 m standard FEP-insulated triaxial lead.
- Factory connector protector around the ClickLoc connection.
- Multiple hazardous-area approval selection.
- 3300 XL interchangeability within the documented 5 mm and 8 mm component boundaries.
Compatibility
- Use as part of a compatible 9 m 3300 XL 8 mm system.
- Confirm 3/8-24 UNF mounting and the non-armored cable-routing requirement.
- Maintain the multiple-approval option where the installation certification depends on it.
Applications
- Radial vibration and position measurement on fluid-film bearing machinery.
- Long cable-route installations using a 9 m matched Proximitor Sensor.
- Approved-area installations designed around the complete 05 approval selection.
FAQ
What total lead length is built into 330101-00-60-90-01-05?
330101-00-60-90-01-05 has a 9.0 m total probe lead.
Does 330101-00-60-90-01-05 use an extension cable?
No. A 9 m probe is paired directly with a 9 m Proximitor Sensor.
Is 330101-00-60-90-01-05 armored?
No. The 330101 base identifies the 3/8-24 UNF probe without armor.
Does 330101-00-60-90-01-05 include a connector protector?
Yes. Connector option 01 specifies the standard ClickLoc connection with protector.
Which approvals apply to 330101-00-60-90-01-05?
The final 05 selects CSA, ATEX and IECEx approvals.
What geometry must match when replacing 330101-00-60-90-01-05?
Match the zero unthreaded length, 6.0-inch case, 3/8-24 UNF thread and 9 m system length.
Recommended Models
| 61-000163-02 | DDS02.2-W100-B 263406 DSM02.3-FW 265398 | DIL M150-XHI22 |
| C15i 5351620150 | DT90L4/BMG/HF | Siemens 1LE5603-3AB73-4AC0-Z |
| STR2003DA | ADB910V3AI | VLT DAM510 175G0169 |
| NT12DMC | Lenze E 94 AZMR 0474SDB | 58B-50/25-AA-PT-51 |
| 040528 | V 50.1 A42 T12 | MTN630719 |
| IL100/350-11/4 | 41B5215X122 | SA47 DRN90S4/BE2/TH/C |
| Schunk 9935816 | 1151-0054-53 | ABB 3BSE008510R1 DO810 |
| Siemens 7KM9300-0AE00-0AA0 | SE-C4.170.030-10.000 | E12 947452 MS-A24VD-K1 |
| FH47B R17 DR63M4/BR/TF | 1746-IB16 | MG5-40C |
| 60-869-03 | 45153051 | AM3VMABM3003 |
