Produces the displacement-related signal used by the matched 3300 XL 8 mm transducer system.
Key Information
330102-00-12-10-01-05 is a Bently Nevada 3300 XL 8 mm probe with a 3/8-24 UNF thread and protective cable armor.
Its ordering string specifies 0.0 inch unthreaded length, 1.2 inch overall case length, 1.0 metre total length, a miniature coaxial ClickLoc connector with connector protector and standard cable, plus CSA, ATEX and IECEx approvals.
The probe is one element of a calibrated 3300 XL 8 mm proximity transducer system and must be paired with the correct extension cable and Proximitor Sensor for the required system length.
Functions
Uses a 3/8-24 UNF probe thread and stainless-steel case for the specified mounting arrangement.
Adds flexible AISI 302/304 stainless-steel armor with an FEP outer jacket around the probe cable.
Retains the exact ClickLoc connector, connector-protector and approval execution encoded by the full model.
Specifications
Manufacturer
Bently Nevada
Exact model
330102-00-12-10-01-05
Probe family
3300 XL 8 mm
Thread
3/8-24 UNF
Cable protection
Armor
Unthreaded length
0.0 in
Overall case length
1.2 in
Total length
1.0 m
Connector / cable option
Miniature coaxial ClickLoc with connector protector; standard cable
Approvals
CSA, ATEX and IECEx
System linear range
2 mm (80 mils)
System sensitivity
7.87 V/mm (200 mV/mil)
Frequency response
0 to 10 kHz
Standard probe temperature range
−52 to +177 °C
Minimum cable bend radius
25.4 mm
About IndustryParts
https://www.industryparts.com/Complete probe geometry and approvals stay traceable
IndustryParts prepares 330102-00-12-10-01-05 enquiries around the exact case, cable, connector and approval execution.
Full suffix preserved
System length checked
Approval execution retained
Installation
Lifecycle
Keep the complete 330102-00-12-10-01-05 string with the probe, extension cable and Proximitor Sensor records.
Inspect armor, FEP jacket, ClickLoc connection and connector protector during planned outages.
Do not mix 5 m, 9 m or 1 m system components without confirming the calibrated system arrangement.
Retain approval markings and installation-zone documentation with the spare record.
Related Models
FAQ
What system information should accompany a 330102-00-12-10-01-05 enquiry?
Provide the Proximitor Sensor model, extension-cable model, required total system length, probe-mounting drawing, quantity and destination.
Does the 01 option on 330102-00-12-10-01-05 include a connector protector?
Yes. The 01 ordering option specifies a miniature coaxial ClickLoc connector with connector protector and standard cable.
Why must the full 330102-00-12-10-01-05 suffix be retained?
The suffix fixes case dimensions, total length, connector execution and approval package; dropping a field can change the supplied probe.
Can the armored cable on 330102-00-12-10-01-05 be bent tightly at the probe?
No. Routing must respect the published 25.4 mm minimum bend radius and avoid strain at the probe and connector.
What commissioning evidence is useful after replacing 330102-00-12-10-01-05?
Record the installed gap voltage, stable signal, channel scaling, alarm checks and the identities of every component in the transducer chain.
