Bently Nevada 330102-00-30-10-01-05 Armored 3/8-24 UNF Proximity Probe
A fully coded 8 mm proximity probe with a 3.0-inch case, 1.0-metre total length and multiple approvals.
Key Information
330102-00-30-10-01-05 decodes to a 3300 XL 8 mm probe with 3/8-24 UNF thread and armored cable. The 00 field selects zero unthreaded length, while 30 identifies the 3.0-inch overall case.
The 10 length field specifies 1.0 m total length. Connector code 01 selects the miniature coaxial ClickLoc connector with connector protector and standard cable.
Approval code 05 identifies the CSA, ATEX and IECEx multiple-approval execution. The probe belongs to a calibrated transducer chain and must be matched with the correct extension cable and Proximitor sensor.
Functions
Non-contact displacement sensing
Observes shaft motion through the compatible 3300 XL 8 mm eddy-current measurement chain.
Static and dynamic output
Supports gap position and vibration measurements through the matched Proximitor system.
Armored field lead
Adds mechanical protection to the probe cable in the specified construction.
API-oriented system performance
Forms part of the 3300 XL system designed to meet API 670 performance requirements.
Specifications
- Manufacturer
- Bently Nevada
- Exact model
- 330102-00-30-10-01-05
- Probe family
- 3300 XL 8 mm
- Mounting thread
- 3/8-24 UNF
- Cable protection
- Armor
- Unthreaded length
- 0.0 in
- Overall case length
- 3.0 in
- Total probe length
- 1.0 m
- Connector
- Miniature coaxial ClickLoc
- Connector protection
- Included
- Cable type
- Standard
- Approval option
- CSA / ATEX / IECEx
About IndustryParts
https://www.industryparts.com/The complete probe suffix remains visible
IndustryParts retains the case length, cable construction, connector code and approval suffix for this probe so the proposed supply can be checked as a complete transducer-chain component.
Installation
Protect the calibrated chain
Record probe, extension cable and Proximitor identities rather than replacing one component by length alone.
Set mechanical position
Confirm thread engagement, target material, bracket rigidity and the approved operating gap before locking the probe.
Verify signal behavior
Check bias/gap voltage and dynamic response against the machine-monitoring procedure before return to service.
Lifecycle
Full suffix retention
Keep every ordering field of 330102-00-30-10-01-05 visible on quotations and receiving records.
Connector care
Inspect the ClickLoc interface, protector and armored lead for contamination, damage or strain.
System evidence
Archive as-left gap, channel scaling and alarm proof with the probe-chain record.
Related Models
FAQ
What does the 30 field specify on 330102-00-30-10-01-05?
It identifies a 3.0-inch overall probe case; it is not the cable-length field.
Which connector is fitted to 330102-00-30-10-01-05?
Code 01 selects the miniature coaxial ClickLoc connector with a connector protector and standard cable.
Can 330102-00-30-10-01-05 be mixed with another probe-system family?
No. Probe, extension cable and Proximitor sensor must belong to the compatible 3300 XL 8 mm chain.
Which approvals are represented by the 05 suffix on 330102-00-30-10-01-05?
The manufacturer ordering table identifies the multiple-approval option covering CSA, ATEX and IECEx.
What commissioning record belongs with 330102-00-30-10-01-05?
Retain the exact suffix, probe-chain identities, installed gap, channel scaling and the completed vibration or position test.
