330102-04-25-10-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with a 3/8-24 UNF thread and stainless steel armor. The exact configuration has 0.4 in unthreaded length, a 2.5 in overall case and a 1.0 m standard probe lead.

Its 02 connector option provides a miniature coaxial ClickLoc connector with standard cable and no connector protector. The 00 approval suffix identifies a configuration for which an agency approval option is not required.

• Armored 3/8-24 UNF construction for exposed lead routing.
• One-meter standard lead permits a one-meter transducer system without an extension cable.
• ClickLoc connector locks finger-tight and helps prevent loosening in service.
• TipLoc and CableLoc construction strengthens the probe-tip and lead attachment.
• Matched 3300 XL components support probe, extension-cable and Proximitor Sensor interchangeability.

• Radial vibration measurement on fluid-film bearing machines.
• Static shaft-position and axial-position measurement.
• Keyphasor phase-reference and speed-measurement applications.
• Existing 3300 XL 8 mm loops requiring the armored 3/8-24 UNF geometry.
• One-meter systems where the probe connects directly to the compatible Proximitor Sensor.

• Preserve every segment of 330102-04-25-10-02-00; the 04, 25, 10, 02 and 00 codes define distinct mechanical and electrical options.
• Verify the installed mounting depth and available 3/8-24 UNF thread engagement before exchange.
• Use the probe only with components selected for the same 3300 XL transducer-system length.
• Maintain the minimum cable bend radius and protect the ClickLoc connection from contamination.
• Set the probe gap and validate vibration, position or phase-reference response after installation.