Bently Nevada 330103-00-08-10-01-00 3300 XL 8 mm Probe
A metric-threaded, non-armored 8 mm proximity probe with an 80 mm case and protected ClickLoc connector.
Overview
330103-00-08-10-01-00 is a 3300 XL 8 mm proximity probe with an M10 × 1 thread. Its ordering code specifies no unthreaded length, an 80 mm overall case, 1.0 m total length and a ClickLoc miniature coaxial connector with protector.
The probe is one calibrated element of a 3300 XL 8 mm transducer system. The probe, extension cable and Proximitor Sensor must form the documented total electrical length; physical fit alone is not sufficient.
Specs
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Model | 330103-00-08-10-01-00 |
| Series | 3300 XL 8 mm proximity transducer system |
| Probe Thread | M10 × 1 |
| Armor | Without armor |
| Unthreaded Length | 0 mm |
| Overall Case Length | 80 mm |
| Total Probe Length | 1.0 m |
| Connector / Cable Option | ClickLoc connector with protector; standard cable |
| Approval Option | 00, approvals not required |
| Nominal Scale Factor | 7.87 V/mm (200 mV/mil) for the complete system |
| Linear Range | 2.0 mm (80 mil) for the complete system |
| Frequency Response | 0 Hz to 10 kHz, +0/-3 dB |
| Minimum Flat Target | 15.2 mm diameter |
| Minimum / Recommended Shaft | 50.8 mm minimum; 76.2 mm recommended |
Features
- Provides non-contact shaft vibration and position measurement through an eddy-current transducer system.
- Uses a metric body thread for equipment already machined for M10 × 1 mounting.
- Protects the miniature coaxial connection during installation and service handling.
- Supports API 670 system practice when the complete standard 5 m chain and installation requirements are satisfied.
Applications
- Radial shaft vibration measurement on fluid-film bearing machines.
- Axial position and reference measurements within the probe range and target requirements.
- Metric-thread replacement where the installed bracket and probe envelope match the complete code.
Lifecycle
- Capture the installed gap voltage and machine baseline before disturbing the probe.
- Verify target material, target size, shaft geometry and bracket stiffness before interpreting a scale-factor difference.
- Keep connector faces clean and dry and route the coaxial cable away from damage and electrical-noise sources.
- Re-gap the loop and document static voltage, runout and vibration after replacement.
FAQ
Can 330103-00-08-10-01-00 replace an imperial-threaded 3300 XL 8 mm probe?
Not as a direct mechanical substitute. The M10 × 1 thread, case envelope and bracket engagement must match the machine installation.
How is the extension cable selected for 330103-00-08-10-01-00?
Choose it so probe plus extension cable equals the total length required by the matched Proximitor Sensor; connector style and cable option must also agree.
Why should target geometry be reviewed before accepting 330103-00-08-10-01-00?
Undersized targets, nearby metal, shaft curvature and material can change linearity and scale factor even when the electrical loop is correctly matched.
What connector clearance is needed for 330103-00-08-10-01-00?
Allow room to fully engage and protect the ClickLoc connector without forcing the cable bend radius or placing tension on the probe lead.
What commissioning records are most useful for 330103-00-08-10-01-00?
Retain cold and running gap voltage, mechanical runout, slow-roll data, channel scaling and a comparison with the previous probe position.
Recommended Models
| X20AIB744 | MILLENIUM3 CD12 | BMXNOM0200 |
| TWK-S 07 555 | Grimm Feed Technology RF40-2 R + FAR-1 | SF57 DRE90M2BE1/Z/LN |
| 1LA9183-4WA60-Z | 909.0262.900 | Compact NS160 H TM 160 D |
| 31F761.9 | ABB 1SVR730020R0200 | DCRE12 |
| 51453540.001 | 692.916107141 | D1092S |
| FTS07-0161-2 | SM 91.10 | ZRVL-150 |
| FC-2000 | BLR-CX 12RL | MDV64ME08DX13HER242122122FE00XXXX00 |
| SEW KT67/T DRP100L4/MM22/AMA6/EI71 | X67AI1223 | C-9402 |
| T5B-4-8902/E | Interroll 138i 1194303 | 3AO350.6 |
| Lenze 33.8610_E 00356139 | 8650200.6220.12000 | MB-402 |
