Provides the metric-thread probe execution for a 3300 XL 8 mm measurement chain.
Key Information
330104-00-08-15-02-00 is a Bently Nevada 3300 XL 8 mm probe with an M10 × 1 thread and protective cable armor.
The ordering string specifies 0 mm unthreaded length, 80 mm overall case length, 1.5 metre total length, a miniature coaxial ClickLoc connector without connector protector and standard cable, with no agency approval option selected.
It belongs to the 3300 XL 8 mm proximity transducer system and must be combined with the correct system-length components.
Functions
Uses an 80 mm stainless-steel case with an M10 × 1 mounting thread.
Protects the probe cable with flexible stainless-steel armor and an FEP outer jacket.
Uses the option 02 ClickLoc connector execution without a connector protector.
Specifications
Manufacturer
Bently Nevada
Exact model
330104-00-08-15-02-00
Probe family
3300 XL 8 mm
Thread
M10 × 1
Cable protection
Armor
Unthreaded length
0 mm
Overall case length
80 mm
Total length
1.5 m
Connector / cable option
Miniature coaxial ClickLoc without connector protector; standard cable
Agency approval option
Not required
System linear range
2 mm (80 mils)
System sensitivity
7.87 V/mm (200 mV/mil)
Frequency response
0 to 10 kHz
Probe tip material
Polyphenylene sulfide (PPS)
Minimum cable bend radius
25.4 mm
About IndustryParts
https://www.industryparts.com/Metric mounting and cable execution remain visible
IndustryParts keeps 330104-00-08-15-02-00 tied to its M10 × 1 mounting, 80 mm case and option 02 connector.
Metric thread confirmed
Case length retained
Matched system requested
Installation
Lifecycle
Retain the full metric 330104-00-08-15-02-00 identity in the asset record.
Inspect the probe tip, armor, connector and cable routing at each planned machine inspection.
Keep the probe and matched transducer-chain component identities together.
Do not substitute an imperial-thread probe for the M10 × 1 execution.
Related Models
FAQ
What distinguishes 330104-00-08-15-02-00 from a 330102 probe?
330104 identifies the metric M10 × 1 probe family, while 330102 uses a 3/8-24 UNF thread.
Does 330104-00-08-15-02-00 include a connector protector?
No. Option 02 specifies the miniature coaxial ClickLoc connector without a connector protector.
What dimension should be checked before ordering 330104-00-08-15-02-00?
Confirm the M10 × 1 mounting thread, 0 mm unthreaded length, 80 mm case length and 1.5 m total length.
Can 330104-00-08-15-02-00 be mixed with any 3300 XL extension cable?
The complete probe-plus-extension length must match the Proximitor Sensor system length, so the installed chain must be checked.
What should be recorded after installing 330104-00-08-15-02-00?
Record the probe gap, channel scaling, signal stability, alarm test and complete probe, extension-cable and Proximitor identities.
