Bently Nevada 330104-01-05-50-02-00 3300 XL 8 mm Proximity Probe
A five-meter armored metric probe with 5.0 m (16.4 ft) electrical length, flexible stainless-steel armor and a miniature ClickLoc connection.
Product Identification
330104-01-05-50-02-00 is a Bently Nevada 3300 XL 8 mm proximity probe with a M10 × 1 threaded case and flexible stainless-steel cable armor. Its option code specifies 10 mm unthreaded length, a 50 mm case and 5.0 m (16.4 ft) total electrical length.
The probe uses a miniature coaxial ClickLoc connector with standard cable and no connector protector. The final suffix specifies that an agency approval is not required.
Engineering Data
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Part Number | 330104-01-05-50-02-00 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Probe Thread | M10 × 1 |
| Cable Armor | Flexible stainless-steel armor with FEP outer jacket |
| Unthreaded Length | 10 mm |
| Overall Case Length | 50 mm |
| Total Electrical Length | 5.0 m (16.4 ft) |
| Connector | Miniature coaxial ClickLoc |
| Cable Construction | Standard 75 Ω triaxial FEP-insulated cable |
| Connector Protector | Not included |
| Agency Approval Option | Not required |
| System Linear Range | 2 mm (80 mil) |
| Nominal System Scale Factor | 7.87 V/mm (200 mV/mil) |
| Frequency Response | 0–10 kHz, +0/-3 dB |
| Recommended Radial Gap | Approximately 1.27 mm (50 mil), -9 Vdc |
| Minimum Flat Target | 15.2 mm (0.6 in) diameter |
| Probe Temperature Range | -52 to +177 °C |
Functions
- Provides non-contacting static position and dynamic vibration signals in a matched 3300 XL 8 mm transducer system.
- Combines a 50 mm case with 5.0 m (16.4 ft) total electrical length for the encoded installation geometry.
- Uses a M10 × 1 standard-mount case with flexible stainless-steel armor.
- Connects through the miniature coaxial ClickLoc interface using standard cable.
- Supports documented component interchangeability when the correct system family and electrical length are maintained.
Applications
- Radial shaft-vibration monitoring on fluid-film bearing machinery.
- Axial shaft-position and thrust-position measurement.
- Eccentricity and shaft-centerline measurement.
- Speed and Keyphasor phase-reference sensing.
- General-area installations where an agency approval option is not required.
Lifecycle
- Keep the complete 330104-01-05-50-02-00 option string so the case, cable and approval selections remain traceable.
- Record probe, extension-cable and Proximitor Sensor length codes before disconnecting the loop.
- Protect the armored cable assembly from excessive bending and connector loading during routing.
- Preserve the 50 mm case and 5.0 m (16.4 ft) electrical-length selection during replacement.
- Re-establish the probe gap and verify the monitor channel before returning machinery protection to service.
FAQ
Which mechanical options are encoded in 330104-01-05-50-02-00?
330104-01-05-50-02-00 is an armored M10 × 1 probe with 10 mm unthreaded length and a 50 mm overall case.
How long is the transducer lead on 330104-01-05-50-02-00?
330104-01-05-50-02-00 has a 5.0 m (16.4 ft) total electrical length.
Which Proximitor Sensor length should be considered for 330104-01-05-50-02-00?
The documented 5 m probe option is used with a 5 m Proximitor Sensor system, so the complete loop for 330104-01-05-50-02-00 must be checked accordingly.
What cable protection is built into 330104-01-05-50-02-00?
330104-01-05-50-02-00 includes flexible stainless-steel armor with an FEP outer jacket.
Which connector and approval options belong to 330104-01-05-50-02-00?
330104-01-05-50-02-00 uses connector option 02 without a protector and approval option 00.
What should be checked during routing of 330104-01-05-50-02-00?
Protect the armored assembly, maintain the minimum bend radius and avoid connector loading when installing 330104-01-05-50-02-00.
