Bently Nevada 330104-01-09-50-01-05 3300 XL 8 mm Metric Proximity Probe
A five-metre armored metric probe intended for the corresponding five-metre 3300 XL 8 mm transducer system.
Product Identification
330104-01-09-50-01-05 is a metric 3300 XL 8 mm probe with M10 × 1 threads, armor and a 5.0 m total lead. The 01 and 09 mechanical fields identify a 10 mm unthreaded length and 90 mm overall case.
The protected miniature ClickLoc connection uses standard cable. Manufacturer selection guidance pairs the five-metre probe with a five-metre Proximitor sensor, making the system-length record central to replacement.
This five-metre execution is distinct from the otherwise similar nine-metre code; the fixed 50 length field must not be replaced by visual similarity.
Engineering Data
- Mounting thread
- M10 × 1
- Cable protection
- Armor
- Unthreaded length
- 10 mm
- Overall case length
- 90 mm
- Total probe length
- 5.0 m (16.4 ft)
- Connector
- ClickLoc miniature coaxial with protector
- Cable type
- Standard
- Agency approvals
- CSA, ATEX and IECEx
Functions
Eddy-current sensing
The probe forms the front end of the matched 3300 XL 8 mm non-contact measurement chain.
Mechanical adjustment
The metric threaded case supports controlled insertion and electrical gap setting in the documented mount.
Protected service joint
The ClickLoc protector keeps the detachable coaxial connection within the specified probe assembly.
About IndustryParts
https://www.industryparts.com/Controlled handling for 330104-01-09-50-01-05
IndustryParts keeps the submitted 330104-01-09-50-01-05 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Suffix and MOD identity kept visible
- Mating hardware recorded before supply
- Acceptance evidence linked to the order
Applications
Matched five-metre chain
Use 330104-01-09-50-01-05 where the installed Proximitor and cable record define a five-metre 3300 XL system.
Metric mounting
Confirm the M10 × 1 thread and 90 mm case fit the existing bracket or housing without changing target clearance.
Approved measurement point
Preserve the 05 approval execution in locations governed by the associated installation documentation.
Lifecycle
Preserve identity
Record the 50 length field and every companion component label before disconnecting the measurement chain.
Protect components
Keep the tip, armor and ClickLoc surfaces clean while routing the five-metre lead within its permitted bend path.
Re-establish baseline
Set the electrical gap and document polarity, response, alarm behavior and the final installed model.
FAQ
Q01
Why is 330104-01-09-50-01-05 not interchangeable with the 9.0 m execution?
+
The 50 field defines a five-metre probe and the complete Proximitor system length must match; a longer lead changes the chain identity.
Q02
Which Proximitor should be checked for 330104-01-09-50-01-05?
+
Confirm the installed sensor is the documented five-metre 3300 XL 8 mm Proximitor execution before approving the spare.
Q03
What should accompany a 330104-01-09-50-01-05 enquiry?
+
Send the full probe and Proximitor labels, mounting dimensions, cable route, gap record and approval requirement.
Q04
How should the protected ClickLoc on 330104-01-09-50-01-05 be serviced?
+
Keep the coaxial faces clean, make the finger-tight locking connection and restore the connector protector without twisting the cable.
Q05
What proves 330104-01-09-50-01-05 is correctly installed?
+
A stable electrical gap, correct polarity, expected channel response and completed alarm proof confirm the restored measurement path.
