Bently Nevada 330104-01-09-90-01-05 3300 XL 8 mm Metric Proximity Probe
A long-reach metric 3300 XL 8 mm probe with a protected ClickLoc connection and multiple agency approvals.
Technical Summary
PRODUCT CONTEXT330104-01-09-90-01-05 is a 3300 XL 8 mm metric probe with M10 × 1 threads and armor. Its order code selects a 10 mm unthreaded length, 90 mm overall case length and 9.0 m total probe length.
The connection is a miniature coaxial ClickLoc with connector protector and standard cable. The final 05 option identifies the CSA, ATEX and IECEx approval execution.
Specifications
CONTROLLED DATAM10 × 1
Armor
10 mm
90 mm
9.0 m (29.5 ft)
ClickLoc miniature coaxial with protector
Standard
CSA, ATEX and IECEx
Features
FUNCTIONAL DISTINCTIONSLong integrated lead
The 9.0 m construction supports installations where the probe connection must reach the monitoring interface without borrowing a shorter probe code.
Protected connection
The connector protector shields the miniature ClickLoc joint while keeping the finger-tight locking connection serviceable.
System interchangeability
The 3300 XL 8 mm platform is designed as an interchangeable probe, extension-cable and Proximitor measurement chain when the correct system length is retained.
About IndustryParts
https://www.industryparts.com/Controlled handling for 330104-01-09-90-01-05
IndustryParts keeps the submitted 330104-01-09-90-01-05 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Complete submitted model retained
- Installed-system evidence reviewed
- Quotation record kept with the enquiry
Compatibility
SELECTION BOUNDARIESTransducer chain
Match 330104-01-09-90-01-05 to the documented 3300 XL 8 mm Proximitor system length; do not add cable length by analogy with the 5.0 m execution.
Mechanical fit
Confirm the M10 × 1 mounting thread, 10 mm unthreaded nose, 90 mm case and available adjustment against the installed bracket or housing.
Approval record
Retain the 05 ending where the installed hazardous-area documentation depends on the CSA, ATEX or IECEx execution.
Replacement
SERVICE WORKFLOWDocument
Photograph the probe, connector and Proximitor labels and record the installed gap and cable route.
Install
Protect the ClickLoc surfaces, preserve bend radius and armor routing, then set the probe by the approved electrical gap procedure.
Verify
Confirm stable gap voltage, polarity, dynamic response and channel alarms before returning the machine-protection path to service.
FAQ
CUSTOMER DECISION SUPPORTCan a 5.0 m probe replace 330104-01-09-90-01-05?
Not by probe-family similarity alone. The complete transducer-system length and cable route must remain compatible with the installed Proximitor sensor.
What mechanical details should be checked for 330104-01-09-90-01-05?
Verify the M10 × 1 thread, 10 mm unthreaded nose, 90 mm case, armor clearance and the final target gap.
What should accompany a 330104-01-09-90-01-05 enquiry?
Send the complete probe and Proximitor labels, mounting photographs, cable route, installed gap, approval requirement and requested quantity.
Why is the connector protector important on 330104-01-09-90-01-05?
It is part of connector option 01 and should remain with the ClickLoc joint to protect the service connection in the installed route.
Which acceptance evidence belongs with 330104-01-09-90-01-05?
Keep the final gap voltage, channel polarity, response check, alarm proof and confirmation that the complete approved model string was installed.
