330130-046-00-06 belongs to the Bently Nevada 330130 standard extension-cable family used with 3300 XL 8 mm proximity probes and Proximitor Sensors. The cable is part of the calibrated system path rather than a general-purpose coaxial lead.

The 046 length code and 06 approval suffix require direct confirmation from the installed label and legacy certification record. The probe lead length and Proximitor total length must also be confirmed before a replacement is selected.

• The 330130 family provides the extension portion of the signal path between a compatible 3300 XL probe and Proximitor Sensor.
• A fixed total electrical length is fundamental to the transducer-system calibration and cannot be inferred from connector fit alone.
• The 75 Ω triaxial cable architecture carries the low-level eddy-current transducer signal.
• The documented minimum bend radius and connector torque protect the cable geometry and connector interface during installation.
• Full suffix verification prevents an undocumented approval or length assumption from entering the machinery-protection loop.

• Maintenance of installed 3300 XL 8 mm proximity systems where the exact 330130-046-00-06 label is present.
• Static shaft-position and dynamic vibration measurement loops on fluid-film bearing machinery.
• Keyphasor or speed reference loops engineered around compatible 3300 XL components.
• Legacy spare assessment requiring the installed cable, probe and Proximitor records to be reviewed together.

• Photograph the complete 330130-046-00-06 label and associated certification marking before removing the installed cable.
• Measure the probe lead arrangement and confirm the Proximitor total-length selection; do not substitute a current catalog length without review.
• Inspect routing for tight bends, damaged armor or connectors and contamination at the connection point.
• Where the suffix cannot be confirmed from plant records, request manufacturer-level compatibility confirmation before commissioning.