Bently Nevada 330171-00-22-10-11-05 3300 5 mm FluidLoc Proximity Probe
A compact 1/4-28 UNF 5 mm probe with a 2.2-inch case, 1.0-metre FluidLoc cable, connector protector and multiple approvals.
Key Information
330171-00-22-10-11-05 is a 330171-series 5 mm probe for installations where an 8 mm probe is too large for the available mounting space.
The order code retains zero unthreaded length, a 2.2-inch overall case, a 1.0-metre lead and the FluidLoc cable option with connector protector.
The final 05 option identifies the multiple-approvals execution. System compatibility still depends on the matched extension cable and Proximitor Sensor.
Functions
Fit restricted mounting space
The smaller probe body supports installations where the standard 8 mm geometry cannot be accommodated.
Measure static and dynamic motion
Within the complete proximity system, the probe supports position and vibration measurement on conductive targets.
Retain a sealed cable choice
The FluidLoc execution and protector remain part of the ordered probe rather than optional field additions.
Specifications
| Manufacturer | Bently Nevada | Exact model | 330171-00-22-10-11-05 |
|---|---|---|---|
| Probe family | 3300 5 mm | Base probe | 330171, without armor |
| Case thread | 1/4-28 UNF | Unthreaded length | 0.0 in |
| Overall case length | 2.2 in | Total probe length | 1.0 m (3.3 ft) |
| Cable type | FluidLoc | Connector | ClickLoc with protector |
| Approval option | Multiple approvals | ||
About IndustryParts
https://www.industryparts.com/Compact probes still require full-chain verification
IndustryParts links the exact FluidLoc probe label, system partners and requested quantity so the selected spare matches the installed chain.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Installation
Confirm mounting envelope
Measure the threaded reach and available tip clearance before removing the original probe.
Identify every system component
Record the extension cable and Proximitor Sensor so total length and family remain controlled.
Protect the connector
Keep the protector and cable seal condition visible during handling and routing.
Validate the measurement
Restore the gap and prove static and dynamic response through the connected monitor.
Lifecycle
- Compact geometry
- Keep the 2.2-inch case and zero-unthreaded-length selection in the mechanical record.
- Cable evidence
- Treat FluidLoc cable and the protected ClickLoc connector as controlled configuration items.
- Approval traceability
- Retain the full 05 suffix and installed approval documentation with the probe label.
FAQ
What distinguishes 330171-00-22-10-11-05 from a standard-cable 330171 probe?
Its 11 connector option combines FluidLoc cable with a ClickLoc connector protector, so the full suffix must be retained.
Can an 8 mm probe be substituted for 330171-00-22-10-11-05?
Only after the mounting envelope, target geometry and complete transducer-system compatibility have been reviewed.
What should be photographed before removing 330171-00-22-10-11-05?
Capture the probe label, mounting depth, connector protector, extension-cable label and Proximitor Sensor label.
Why is the complete 05 approval suffix important for 330171-00-22-10-11-05?
It distinguishes the ordered multiple-approvals execution and should remain tied to the installed documentation.
How should 330171-00-22-10-11-05 be accepted after service?
Restore the documented gap, confirm the matched system length and verify stable position and vibration response.
Request a model-specific quotation
Send the complete 330171-00-22-10-11-05 label, requested quantity, delivery destination and installed-system context.
