Bently Nevada 330180-X1-05 MOD: 145004-132 Proximitor Sensor
A MOD-controlled 3300 XL 8 mm Proximitor Sensor entry whose placeholder length code must be resolved from the physical label.
Technical Summary
330180-X1-05 MOD: 145004-132 identifies a Bently Nevada 3300 XL 8 mm Proximitor Sensor request that retains both a variable ordering field and a specific modification reference. The X1 field must be replaced by the actual label code before procurement.
Within the standard 330180 structure, 11, 51 and 91 are DIN-mount options for different total system lengths, while suffix 05 carries the multi-approval selection. The MOD number remains an independent identity control and must not be inferred from other 145004 variants.
Specifications
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Model | 330180-X1-05 MOD: 145004-132 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Component Role | Proximitor Sensor |
| AA Field | X1 placeholder; resolve to 11, 51 or 91 from the label |
| Mounting Family | DIN-mount option when X1 resolves to a valid standard code |
| System Length | Not stated; depends on the resolved AA code |
| Approval Suffix 05 | CSA / ATEX / IECEx option |
| Modification Reference | 145004-132 |
| Verification Requirement | Complete label, MOD record, probe and extension-cable identities |
Features
- Conditions the proximity-probe signal for a compatible 3300 XL 8 mm system.
- Keeps the DIN-mount family visible while avoiding an unsupported system-length claim.
- Preserves the exact MOD reference as part of the procurement identity.
- Supports multi-approval system planning when the complete loop remains compliant.
Compatibility
- Resolve X1 from the installed sensor label before selecting a replacement.
- Match probe type, extension cable, total system length and monitor interface as one loop.
- Verify the MOD documentation rather than borrowing details from another 145004 suffix.
- Review hazardous-area certificates and installation parameters for the complete transducer system.
Replacement
- Capture label photographs, gap voltage, cable identities and monitor setup before removal.
- Maintain cable routing, shielding, separation and approved installation practice.
- Re-gap and verify linear response, polarity and alarm behavior after the change.
FAQ
Can 330180-X1-05 MOD: 145004-132 be ordered with X1 unchanged?
No. X1 is a placeholder and must be resolved from the physical label or original order record.
Does 330180-X1-05 MOD: 145004-132 define the total system length?
Not until X1 is resolved. The possible standard DIN-mount codes correspond to different system lengths.
May another 145004 MOD be used for 330180-X1-05 MOD: 145004-132?
No. MOD suffixes can represent different controlled configurations; use the exact modification record.
What loop details are required for 330180-X1-05 MOD: 145004-132?
Provide probe, extension cable, Proximitor Sensor, total length, monitor channel and existing gap information.
Does approval suffix 05 make any probe-and-cable combination acceptable?
No. Approval and electrical performance depend on the complete documented transducer loop and installation.
What is the safest replacement approach for 330180-X1-05 MOD: 145004-132?
Resolve the label code and MOD first, then verify the complete system and commission with recorded gap and response checks.
Recommended Models
| R7849 A 1023 | Rexroth PV7-1A/100-118RE07MC3-16 R900511215 | ADK 3700 |
| DN50 PN64 1.4408 | AM503B | Allweiler SPF/M40R46-W16 |
| M74007-A 8111 | MDS-A-BT-2 | 8591849.9101 |
| RF5108WKK1-433 | USLKG10 N 3003923 | 3RV2031-4BA10 |
| GDM-8145 | RV033873300 | 848525887 |
| 3AA01318700 | 1002UU01 | MAC063D-0-JS-4-C/095-A-0/WI518LV |
| Haas Laser 18-06-39-00/02 | NRT405F902 | DDRC810DT-GL |
| 6259653000000000 | PRT-CTRL-DIN | VHF210R46E7BS-W159-L |
| G4SB-6BS-EU/BG | TSPT-6370 | 65478 ET5S |
| EMF2111IB | CS540 / HL10 | X20BM23 |
