Bently Nevada 330180-X1-05 MOD: 145004-75 Modified 3300 XL 8 mm Proximitor Sensor
A multiple-approval Proximitor Sensor with an unresolved X1 system-length code and the exact MOD 145004-75 identity.
Product Profile
Bently Nevada 330180-X1-05 MOD: 145004-75 is a modified 3300 xl 8 mm proximitor sensor identified by the complete submitted ordering string. Its suffixes and revision fields remain part of the supply identity.
Selection of 330180-X1-05 MOD: 145004-75 should be based on the installed label, host-system record and the verified interface details below; neighboring family numbers are not treated as interchangeable.
Technical Data
System Role
The Proximitor Sensor conditions the matched probe-system signal for static position and dynamic vibration monitoring.
SpringLoc terminals support field wiring without treating the sensor as mechanically interchangeable with every 330180 execution.
The 05 suffix retains the published multiple-approval option.
X1 is deliberately preserved until the exact system length is proven by the installed label or MOD 145004-75 record.
Compatibility & Service
- Photograph the full label, including X1 and MOD 145004-75, before removing wiring.
- Record probe and extension-cable codes, mounting method, power, gap voltage and monitor channel.
- Resolve X from controlled evidence; never borrow the length from MOD 145004-132.
- After installation, confirm supply, OK status, scale response, polarity, gap and channel alarms.
Applications
- Controlled replacement of the exact modified Proximitor execution.
- 3300 XL 8 mm measurement chains with confirmed probe-plus-extension system length.
- Machinery protection or condition-monitoring channels where the MOD-specific identity is documented.
FAQ
Q01Why is X not completed in 330180-X1-05 MOD: 145004-75?+
The submitted identity does not resolve the system-length digit. Keeping X prevents an unsupported choice among the published 1 m, 5 m and 9 m executions.
Q02Can 330180-X1-05 MOD: 145004-75 be replaced by MOD 145004-132?+
No direct interchangeability is established. The MOD references identify different controlled records and must be compared using manufacturer or installed-system evidence.
Q03What does the final 05 mean in 330180-X1-05 MOD: 145004-75?+
It identifies the multiple-approval option; it does not resolve the X system-length field.
Q04Which companion parts must be recorded for 330180-X1-05 MOD: 145004-75?+
Record the exact probe and extension-cable catalog numbers so their combined electrical length can be checked against the resolved Proximitor execution.
Q05What should be tested after replacing 330180-X1-05 MOD: 145004-75?+
Verify power, wiring polarity, OK condition, gap voltage, calibrated movement response and every configured alarm or protection function.
