Bently Nevada 330330-080-01-00 Armored HTPS Extension Cable
An 8.0 m armored spare extension cable that must be capacitance-matched to the installed HTPS probe.
Product Profile
330330-080-01-00 is the armored 8.0 m extension-cable execution for the 3300 XL 16 mm High Temperature Proximity System. It is a matched spare, not a general-purpose coaxial lead.
The probe serial number controls the spare matching process. Armor protects the routed portion but does not remove the need for correct supports, bend control and connector care.
Technical Data
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Model | 330330-080-01-00 |
| System | 3300 XL 16 mm High Temperature Proximity System |
| Cable Length | 8.0 m (26.3 ft) |
| Stainless-Steel Armor | Included |
| Nominal Armor Length | 6.6 m (21.7 ft) |
| Agency Approval | Not required |
| Matching Requirement | Probe serial number required for spare order |
| Jacket Note | Stainless-steel armor supplied with FEP outer jacket |
System Role
- Maintains the matched electrical path between the HTPS probe and Proximitor Sensor.
- Adds mechanical protection along the documented armored section of the route.
- Allows the existing probe to remain in service when only the matched cable requires replacement.
- Preserves the high-temperature system architecture when correctly matched and installed.
Compatibility
- Supply the original probe serial so the replacement can be capacitance-matched.
- Confirm connector types, route length, armor clearances and bend locations.
- Verify that a no-approval execution is acceptable for the installation.
- Do not substitute a 25 mm or standard-temperature extension cable.
Applications
- Armored routing in high-temperature turbine monitoring installations.
- Replacement of a damaged matched cable while retaining the probe.
- Long remote connection to panel-mounted HTPS electronics.
FAQ
What makes 330330-080-01-00 a matched spare rather than a standard cable?
Its capacitance is adjusted against the existing probe, so the probe serial and original system record are required.
How should the armor on 330330-080-01-00 be routed?
Allow space for the protected diameter and terminations, maintain bend control and support the cable without loading either connector.
Can a non-armored 330330 cable replace 330330-080-01-00?
Only after the mechanical and environmental installation is reviewed; the submitted model specifically includes armor.
What approval check applies to 330330-080-01-00?
The final field is the no-approval execution, so confirm that the project does not require another certified variant.
What should be inspected before ordering 330330-080-01-00?
Inspect the probe label, cable jacket and armor, both connectors, route supports and the sensor end for heat or contamination damage.
What proves successful commissioning of 330330-080-01-00?
Record the matched identity, static output, calibration behavior, polarity and monitored-channel functional test.
Recommended Models
| DM486 | USST 4-MT P/P | Rietschle VTA 80 (01) |
| HCS01.1E-W0006-A-02-A-CC-EC-PB-NN-NN-FW | NBB2-8GM30-E2-0.5M-V1 119737 | X20DC11A6 |
| Pilz 751107 | Beckhoff EL4122 | S000760K04 |
| HE 65M 205-00358 | EST 3-PPS/M-230 2990108 | SRB-E-201LC |
| iRS FM 5 049 756 B9 | MCE3 | PDM090.515300 PDM090A015 |
| 772476 | MBMU9A2AB | FMZ5000 903466 |
| Dehn BCT MLC BE 12 919321 | SZK 40 BR3T12 300503 | SM 12D PECO |
| 01B010020 | KF47 DRE100M4/TF | ABB ACS60100303 S00C1200001 |
| FEG 12.24.45 | ABB 2CDG 110 113 R0011 | KE300 0 608 830 162 |
| DSS1.3 241899 | AAI135-H00 | MCV40A0150-503-4-00 |
