Bently Nevada 330702-00-30-10-01-05 Armored 1/2-20 UNF Proximity Probe
An armored 11 mm proximity probe with 1.0-metre total length and a protected ClickLoc connector.
Product Overview
330702-00-30-10-01-05 is a 3300 XL 11 mm proximity probe with 1/2-20 UNF thread and armor. The 00 code sets zero unthreaded length and 30 specifies a 3.0-inch overall case.
Length field 10 identifies a 1.0 m probe. Code 01 supplies the miniature coaxial ClickLoc connector and protector with standard cable, while suffix 05 selects the listed multiple approvals.
The 11 mm system provides a longer linear range than the 8 mm family and publishes 3.94 V/mm (100 mV/mil) sensitivity. All components of a 7200-series chain must be replaced when upgrading to 3300 XL 11 mm.
Performance
Extended-range proximity measurement
Supports applications requiring a longer linear measurement range than the 8 mm system.
Static position monitoring
Measures thrust position, rod position or ramp differential expansion in approved mechanical arrangements.
Dynamic reference sensing
Supports tachometer, zero-speed or Keyphasor functions with the compatible monitor path.
Armored cable protection
Adds mechanical protection to the specified one-metre probe lead.
Technical Details
- Manufacturer
- Bently Nevada
- Exact model
- 330702-00-30-10-01-05
- Probe family
- 3300 XL 11 mm
- Mounting thread
- 1/2-20 UNF
- Cable protection
- Armor
- Unthreaded length
- 0.0 in
- Overall case length
- 3.0 in
- Total length
- 1.0 m
- Connector
- Miniature coaxial ClickLoc
- Connector protector
- Included
- Approval option
- Multiple approvals
- System sensitivity
- 3.94 V/mm (100 mV/mil)
- System requirement
- Use matched 11 mm probe, cable and Proximitor
- 7200 upgrade rule
- Replace all transducer components
About IndustryParts
https://www.industryparts.com/The 11 mm chain is preserved as one calibrated system
IndustryParts retains the complete probe suffix and requests the extension-cable and Proximitor identities before proposing this longer-range sensor.
System Integration
Maintain the 11 mm chain
Verify probe, extension cable and Proximitor sensor identities before adjusting the mechanical setup.
Set the usable range
Establish the approved gap or position using the monitor voltage and application-specific target geometry.
Validate the measurement path
Prove static travel or dynamic reference behavior and document channel scaling and alarms.
Applications
Thrust position
Monitoring axial shaft movement over the approved linear range.
Differential expansion
Measuring ramp or complementary expansion arrangements with suitable mechanics.
Speed and phase reference
Providing tachometer, zero-speed or Keyphasor input in a compatible system.
FAQ
What system sensitivity applies to 330702-00-30-10-01-05?
The matched 3300 XL 11 mm system publishes 3.94 V/mm, equivalent to 100 mV/mil.
Which case and cable lengths are selected by 330702-00-30-10-01-05?
The 30 field gives a 3.0-inch case and the 10 field gives 1.0 m total probe length.
Can 330702-00-30-10-01-05 operate with 3300 XL 8 mm components?
No. It must be used with the compatible 11 mm extension cable and Proximitor sensor.
What must change when upgrading a 7200 chain to 330702-00-30-10-01-05?
The manufacturer requires replacement of all transducer-system components.
How is 330702-00-30-10-01-05 accepted for a position application?
Confirm chain identity, mechanical travel, linear operating region, scaling, alarm setpoints and the final as-left gap.
