go on
Home>TSI>Bently Nevada 330703-000-050-10-02-00 Proximity Probes

Hot Categories

Bently Nevada 330703-000-050-10-02-00 Proximity Probes

Bently Nevada 330703-000-050-10-02-00 Proximity Probes

Item NO.: Bently 330703-000-050-10-02-00
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameBently Nevada 330703-000-050-10-02-00 Proximity Probes
  • Item NO.Bently 330703-000-050-10-02-00
  • Weight1.0000 kg = 2.2046 lb = 35.2740 oz
  • CategoryTSI
  • BrandBently Nevada
  • Creation Time2025-03-26
3300 XL 11 MM | STOCKED M14 PROBE

Bently Nevada 330703-000-050-10-02-00 Unarmored M14×1.5 Proximity Probe

A stocked unarmored M14×1.5 probe with a 50 mm case and one-metre lead.

BrandBently Nevada
Model330703-000-050-10-02-00
Product TypeUnarmored M14×1.5 Proximity Probe
01

Product Profile

330703-000-050-10-02-00 is a commonly stocked M14×1.5 probe for the 3300 XL 11 mm transducer system. It has zero unthreaded length, a 50 mm case, one-metre lead, miniature ClickLoc connector and no agency approval option.

The unarmored cable is intended for a suitably protected route and must form the correct total length with its extension cable.

02

Technical Data

Manufacturer Bently Nevada, a Baker Hughes business
Complete Model 330703-000-050-10-02-00
Product Family 3300 XL 11 mm
Case Thread M14×1.5
Cable Armor Without armor
Unthreaded Length 0 mm
Overall Case Length 50 mm
Total Probe Length 1.0 m
Connector Option Miniature ClickLoc coaxial connector
Agency Approval Not required
Linear Range 4.0 mm (160 mil)
Frequency Response 0 to 8 kHz typical
03

System Role

  • Commonly stocked configuration supports planned maintenance of standard M14 points.
  • Unarmored FEP-insulated lead suits protected routing.
  • TipLoc and CableLoc construction help retain probe-tip and lead integrity.
  • Locknut includes holes for safety-wire practice where required.
04

Compatibility

  • Use a matching 330730 extension cable and 330780 Proximitor Sensor.
  • The one-metre probe lead must be included in the five- or nine-metre total system length.
  • Do not use where armored routing or an approved probe option is required without engineering review.
05

Applications

  • Axial position, differential expansion and rod-position measurement.
  • Tachometer, zero-speed and Keyphasor measurement.
  • Replacement of an identical M14 unarmored probe in a 3300 XL 11 mm loop.
06

FAQ

Why is 330703-000-050-10-02-00 considered a stocked configuration?

Bently Nevada lists this exact complete order code among commonly stocked 11 mm probes.

Can 330703-000-050-10-02-00 replace armored 330704-000-050-10-02-05?

Only if the cable route and approval requirements permit an unarmored, non-approved probe.

Which extension cable belongs with 330703-000-050-10-02-00?

Choose a 330730 cable that brings the one-metre lead to the connected 330780 system length.

What holder detail matters for 330703-000-050-10-02-00?

The holder must provide M14×1.5 engagement without exceeding the listed 21 mm maximum.

Is 330703-000-050-10-02-00 approved for a classified area?

The final 00 code means no agency approval option; use the required approved configuration and installation drawing.

What should be documented after installing 330703-000-050-10-02-00?

Record final gap voltage, probe depth, loop components, scale verification and the alarm or trip test.

You May Also Like