Integrates the probe and Proximitor Sensor in one PROXPAC XL enclosure.
Key Information
330800-28-45-020-03-02 is a Bently Nevada PROXPAC XL proximity transducer assembly built around a 3300 XL 8 mm probe and integrated Proximitor Sensor.
The exact order code specifies the multiple-approval 8 mm probe, a 4.5 inch standoff, 2.0 inch probe penetration, one 3/4-14 NPT fitting, one 3/4-to-1/2 NPT stainless-steel reducer, two plugs and a 3/4-14 NPT mounting thread.
The housing is rated Type 4X and IP66 for hose-directed water. It is not a pressure-resistant enclosure and does not use a separate extension cable.
Functions
Eliminates the separate extension cable used in a conventional proximity chain.
Provides the ordered fittings, reducer and plugs for the specified conduit arrangement.
Uses a Type 4X and IP66 housing for hose-directed-water protection.
Specifications
Manufacturer
Bently Nevada
Exact model
330800-28-45-020-03-02
Product family
PROXPAC XL
Probe option
3300 XL 8 mm with multiple approvals
Standoff length
4.5 in
Probe penetration
2.0 in (51 mm)
Fitting option
One 3/4-14 NPT fitting; one 3/4-to-1/2 NPT stainless-steel reducer; two plugs
Mounting thread
3/4-14 NPT
Housing protection
Type 4X and IP66
Extension cable
Not used
Housing pressure rating
Not pressure resistant
Measurement basis
Integrated 3300 XL proximity system
About IndustryParts
https://www.industryparts.com/Mechanical configuration and enclosure details remain aligned
IndustryParts reviews 330800-28-45-020-03-02 against its standoff, penetration, fittings and mounting thread.
Integrated assembly confirmed
Mounting dimensions retained
Fitting package checked
Installation
Lifecycle
Keep the complete 330800-28-45-020-03-02 configuration with the machine location record.
Inspect enclosure seals, fittings, plugs and cable entries during planned service.
Treat standoff, penetration and mounting-thread changes as mechanical engineering changes.
Retain approval markings and the commissioning record with the installed assembly.
Related Models
FAQ
Does 330800-28-45-020-03-02 require a separate extension cable?
No. PROXPAC XL integrates the Proximitor Sensor with the probe assembly and does not use a separate extension cable.
Is the 330800-28-45-020-03-02 housing pressure resistant?
No. Its Type 4X and IP66 rating addresses hose-directed water; the housing is not a pressure-resistant enclosure.
Which mounting dimensions should accompany a 330800-28-45-020-03-02 enquiry?
Provide the 3/4-14 NPT mounting location, 4.5 inch standoff, 2.0 inch penetration and machine drawing.
What fittings are included by the 03 option on 330800-28-45-020-03-02?
It specifies one 3/4-14 NPT fitting, one 3/4-to-1/2 NPT stainless-steel reducer and two plugs.
What should be tested after installing 330800-28-45-020-03-02?
Verify enclosure sealing, gap voltage, signal stability, channel scaling, alarms and the approved machine response.
