go on
Home>TSI>Bently Nevada 330851-01-000-020-10-00-00 Proximity Probe

Hot Categories

Bently Nevada 330851-01-000-020-10-00-00 Proximity Probe

Bently Nevada 330851-01-000-020-10-00-00 Proximity Probe

Item NO.: 3777819
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameBently Nevada 330851-01-000-020-10-00-00 Proximity Probe
  • Item NO.3777819
  • Weight1.0000 kg = 2.2046 lb = 35.2740 oz
  • CategoryTSI
  • BrandBently Nevada
  • Creation Time2026-09-24
3300 XL 25 MM | ENGLISH THREAD | 1.0 M PROBE

Bently Nevada 330851-01-000-020-10-00-00 Proximity Probe

A 25 mm proximity probe with 1¼-12 thread, 2.0 in case, 1.0 m total length and no armor.

BrandBently Nevada
Model330851-01-000-020-10-00-00
Product Type3300 XL 25 mm Proximity Probe
01

Technical Summary

330851-01-000-020-10-00-00 is a threaded 3300 XL 25 mm probe for large-gap displacement and vibration measurements. Its code fixes the mechanical case and cable execution needed for installation planning.

The probe is one component of a calibrated transducer system. The probe, extension cable and Proximitor Sensor must be selected for the same total system length.

02

Specifications

Manufacturer Bently Nevada, a Baker Hughes business
Model 330851-01-000-020-10-00-00
System 3300 XL 25 mm Proximity Transducer System
Probe Case 1¼-12 thread
Unthreaded Length 0.0 in
Overall Case Length 2.0 in
Probe Total Length 1.0 m (3.3 ft)
Cable Armor No armor
Agency Approval No approvals
Cable Type 75 ohm FluidLoc cable
System-Matching Rule Probe plus extension cable must equal sensor system length
03

Features

  • Provides non-contact shaft position and vibration measurement within the matching 25 mm system.
  • Uses a threaded case for adjustable mounting and mechanical retention.
  • Includes a removable-nut connector arrangement for routing through restricted openings.
  • Employs a PFA-jacketed probe cable in the non-armored execution.
04

Compatibility

  • Use only with 3300 XL 25 mm system components of the matching total length.
  • Confirm thread, case length, probe reach and bracket geometry against the installed machine.
  • The no-approval suffix must agree with the site classification and project documentation.
05

Replacement

  • Record the installed probe gap and mounting depth before loosening the locknut.
  • Inspect the extension cable, connector protection and Proximitor Sensor rather than changing the probe in isolation.
  • Set the mechanical gap and prove the complete system output before returning the machine to service.
06

FAQ

Can 330851-01-000-020-10-00-00 connect directly to any Bently Nevada Proximitor Sensor?

No. It belongs to the 3300 XL 25 mm system and the combined probe and extension-cable length must match the selected sensor system length.

What installation dimension is critical for 330851-01-000-020-10-00-00?

Confirm the 1¼-12 thread, 2.0 in overall case and required insertion depth before ordering or moving the locknut.

Does 330851-01-000-020-10-00-00 include stainless-steel cable armor?

No. The armor field is 00, so this execution is supplied without armor.

Can an M30x2 probe replace 330851-01-000-020-10-00-00?

Not without changing and validating the mechanical mounting; the submitted probe uses a 1¼-12 English thread.

What should be checked after fitting 330851-01-000-020-10-00-00?

Verify mounting torque, connector condition, probe gap, static output and the complete channel response under the approved commissioning procedure.

Which information should accompany a 330851-01-000-020-10-00-00 enquiry?

Provide the probe label, extension-cable number, Proximitor Sensor number, machine mounting details, existing gap and area-classification requirement.

You May Also Like