Bently Nevada 330880-01-20-058-03-02 PROXPAC XL Proximity Transducer Assembly
A self-contained English PROXPAC XL housing with its Proximitor sensor installed and the probe intentionally omitted from this order code.
Technical Summary
PRODUCT CONTEXT330880-01-20-058-03-02 is an English PROXPAC XL proximity-transducer assembly. It combines the protective housing and 3300 XL Proximitor sensor while leaving the probe out of the supplied configuration.
Its mechanical code specifies a 2.0 in standoff adapter, 5.8 in probe penetration, one 3/4-14 NPT fitting, one stainless reducer to 1/2-14 NPT, two plugs and a 3/4-14 NPT mounting thread.
Specifications
CONTROLLED DATANo probe; Proximitor sensor with multiple approvals
2.0 in
5.8 in
3/4-14 NPT fitting, SST reducer to 1/2-14 NPT and two plugs
3/4-14 NPT
Type 4X / IP66
Up to 305 m (1,000 ft) to the monitor
-17.5 to -26 VDC, 12 mA maximum
-23 to -26 VDC
Features
FUNCTIONAL DISTINCTIONSIntegrated signal conditioning
The Proximitor sensor is mounted inside the field housing, reducing the need for a separate nearby sensor enclosure.
Long field-wiring capability
The conditioned signal may be carried to the monitor over the published field-wiring distance when the approved cable practice is followed.
Defined mechanical stack
Standoff, penetration, mounting thread and conduit hardware are encoded separately, preventing a visually similar housing from being treated as equivalent.
About IndustryParts
https://www.industryparts.com/Controlled handling for 330880-01-20-058-03-02
IndustryParts keeps the submitted 330880-01-20-058-03-02 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Complete submitted model retained
- Installed-system evidence reviewed
- Quotation record kept with the enquiry
Compatibility
SELECTION BOUNDARIESProbe selection
Because 330880-01-20-058-03-02 is ordered without a probe, verify the required 3300 XL 8 mm probe, its one-metre cable and sleeve fit before supply.
Power and barriers
Confirm whether barriers are present and use the applicable negative supply range; a more positive supply can reduce the linear range.
Target geometry
Check the target diameter, shaft diameter, probe side view and available penetration before accepting the mechanical arrangement.
Replacement
SERVICE WORKFLOWRecord
Capture the full housing code, installed probe label, supply voltage, gap, conduit entry and target dimensions.
Rebuild
Retain the 2.0 in standoff, 5.8 in penetration and exact reducer/plug arrangement while protecting the enclosure seals.
Commission
Set the approved probe gap, check supply and output polarity, then complete the monitor response and enclosure-integrity checks.
FAQ
CUSTOMER DECISION SUPPORTDoes 330880-01-20-058-03-02 include a proximity probe?
No. Option 01 supplies the Proximitor sensor with multiple approvals but no probe, so the correct 3300 XL 8 mm probe must be selected separately.
Which dimensions control the fit of 330880-01-20-058-03-02?
The 2.0 in standoff, 5.8 in penetration and 3/4-14 NPT mounting thread define the principal mechanical stack.
What should accompany a 330880-01-20-058-03-02 enquiry?
Provide the housing and installed-probe labels, target and shaft dimensions, supply/barrier arrangement, conduit photographs and requested quantity.
Can 330880-01-20-058-03-02 use the same supply with and without a barrier?
The published supply window changes when barriers are present, so the existing loop and barrier documentation must be reviewed before commissioning.
What confirms 330880-01-20-058-03-02 is sealed after replacement?
Verify the specified fittings and plugs, gasket and cover condition, conduit sealing and the approved enclosure inspection before service.
