Bently Nevada 330904-00-05-05-01-00 3300 NSv M8x1 Armored Proximity Probe
A narrow-side-view M8x1 probe with armor, a 50 mm case, 0.5-metre standard cable and protected ClickLoc connector.
Key Information
330904-00-05-05-01-00 is the armored M8x1 member of the 3300 NSv probe family. NSv geometry is intended for restricted side-view clearances and smaller measurement targets.
The order code selects zero unthreaded length, a 50 mm overall case, a 0.5-metre lead and the standard-cable ClickLoc connector with protector.
The final 00 option indicates that an agency approval option was not requested. The probe remains part of a complete NSv transducer chain.
Functions
Measure in tight clearances
The NSv tip geometry supports compressor and other installations where standard probe side view is restricted.
Work with smaller targets
The family is suited to small shaft and axial targets within its documented application limits.
Protect the routed lead
Armor and the connector protector form part of this exact mechanical execution.
Specifications
| Manufacturer | Bently Nevada | Exact model | 330904-00-05-05-01-00 |
|---|---|---|---|
| Probe family | 3300 NSv | Probe body | 330904, with armor |
| Case thread | M8x1 | Unthreaded length | 0 mm |
| Overall case length | 50 mm | Total probe length | 0.5 m (20 in) |
| Connector and cable | Protected ClickLoc, standard cable | Agency approval option | Not required |
About IndustryParts
https://www.industryparts.com/NSv selection includes the complete mounting geometry
IndustryParts keeps the probe identity, armored lead arrangement and target evidence together for quotation review.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Installation
Survey the clearance
Record the counterbore, side-view clearance, target size and installed gap.
Check system length
Match the probe and extension-cable sum to the NSv Proximitor Sensor total length.
Protect the armor
Route the lead without crushing the armor or loading the connector.
Prove the channel
Confirm gap voltage, target response and monitor indication after installation.
Lifecycle
- Geometry record
- Keep the 50 mm case and zero-unthreaded-length execution with the machine drawing.
- Target evidence
- Retain shaft or axial-target dimensions when the NSv probe is used in restricted geometry.
- System evidence
- Store all three transducer-chain labels with commissioning readings.
FAQ
Why is side-view clearance important for 330904-00-05-05-01-00?
The NSv family is selected for restricted geometry, so the counterbore and nearby metal must remain within the approved installation plan.
Can an unarmored 330903 replace 330904-00-05-05-01-00?
No automatic substitution should be made because the lead protection and mechanical routing requirements differ.
What chain information belongs with a 330904-00-05-05-01-00 quotation?
Send probe, extension-cable and Proximitor Sensor labels plus the measured target and mounting geometry.
How should the armored lead of 330904-00-05-05-01-00 be handled?
Route it without tight bends, crushing or connector load, and preserve the installed strain-relief plan.
What acceptance checks follow 330904-00-05-05-01-00 installation?
Verify the documented gap, stable output, correct target response and clean monitor status.
Request a model-specific quotation
Send the complete 330904-00-05-05-01-00 label, requested quantity, delivery destination and installed-system context.
