Bently Nevada 330904-00-05-05-01-IN 3300 NSv M8x1 Armored Proximity Probe
An armored M8x1 NSv probe with zero unthreaded length, a 50 mm case, a 0.5-metre lead and a protected standard-cable connector.
Product Overview
330904-00-05-05-01-IN retains the 330904 armored M8x1 probe body and the 00-05-05-01 configuration fields used by the 3300 NSv ordering structure.
Those fields identify zero unthreaded length, a 50 mm case, a 0.5-metre lead and the protected ClickLoc connector on standard cable. The terminal IN marking remains part of the submitted identity and should be verified from the complete installed label.
Performance
Preserve narrow-side-view geometry
The NSv construction supports restricted probe-clearance and smaller-target installations.
Retain armored routing
The armored lead remains a controlled part of the mounting and cable-protection plan.
Keep terminal-code evidence
The IN suffix should remain visible in quotation, receiving and maintenance records.
Technical Details
| Manufacturer | Bently Nevada | Exact model | 330904-00-05-05-01-IN |
|---|---|---|---|
| Probe family | 3300 NSv | Probe body | 330904, M8x1 with armor |
| Unthreaded length | 0 mm | Overall case length | 50 mm |
| Total probe length | 0.5 m (20 in) | Connector and cable | Protected ClickLoc, standard cable |
| Terminal ordering code | IN | ||
About IndustryParts
https://www.industryparts.com/Terminal ordering codes remain visible through service
IndustryParts keeps the full IN-marked label, installed geometry and requested quantity together before quotation.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
System Integration
Freeze the label record
Photograph the complete IN suffix, probe case and connected system labels.
Confirm the installation
Measure target geometry, case engagement, side-view clearance and static gap.
Transfer the route
Preserve armor supports, bend condition and connector protection.
Validate the channel
Verify stable gap voltage and the approved monitor response after service.
Applications
Restricted-clearance measurement
Applying an NSv probe where a standard probe cannot meet side-view clearance.
Armored cable routing
Maintaining mechanical lead protection between the probe and the extension-cable connection.
Label-controlled replacement
Using the full terminal IN identity as receiving and service evidence.
FAQ
How should the IN suffix on 330904-00-05-05-01-IN be handled?
Retain it exactly as marked and provide a complete label photograph so the quotation matches the installed identity.
Is 330904-00-05-05-01-IN interchangeable with the 00-suffix execution?
Do not approve substitution from the shared 330904 base alone; compare the full labels and installed approval record.
What geometry should be supplied for a 330904-00-05-05-01-IN review?
Include case engagement, counterbore, side-view clearance, target size and the operating gap.
What must remain unchanged when routing 330904-00-05-05-01-IN?
Preserve armor support, connector protection and clearance from edges that could load or damage the cable.
How is a serviced 330904-00-05-05-01-IN channel accepted?
Confirm the complete chain identity, restore gap, check stable output and complete the monitor functional test.
Request a model-specific quotation
Send the complete 330904-00-05-05-01-IN label, requested quantity, delivery destination and installed-system context.
