330910-00-07-05-02-CN is a Bently Nevada 3300 NSv standard-mount proximity probe with an M10 × 1 threaded case and stainless steel armor. Its ordering code specifies 0 mm unthreaded length, a 70 mm overall case, a 0.5 m total probe length and a standard-cable ClickLoc connector.

The probe belongs to the 3300 XL NSv transducer system for installations with restricted counterbore, side-view or rear-view clearance. In a matched system it supports radial vibration, radial position, axial position, tachometer, zero-speed and phase-reference measurements.

• M10 × 1 armored construction for metric standard-mount installations.
• Gold-plated brass ClickLoc connection designed to lock finger-tight.
• TipLoc and CableLoc construction supports a robust probe-tip and cable attachment.
• Narrow side-view behavior supports machinery locations where standard 5 mm or 8 mm systems have limited clearance.
• The the supported country-specific CN ordering option is retained by the final ordering-code segment.

• Radial vibration and radial shaft-position measurements on fluid-film bearing machines.
• Axial or thrust-position measurements where a smaller target or restricted mounting space is present.
• Tachometer and zero-speed sensing with a compatible 3300 XL NSv system.
• Phase-reference or Keyphasor signal generation for machinery monitoring.
• Centrifugal air, refrigeration and process-gas compressors with tight probe-installation requirements.

• Retain the complete 330910-00-07-05-02-CN string because case geometry, cable length, connector construction and approval are all encoded in the suffix.
• Match the 0.5 m probe lead with the extension cable and Proximitor Sensor required for the selected total system length.
• Keep M10 thread engagement at or below 15 mm and observe the documented torque limits.
• Protect ClickLoc connections from liquids and maintain the 25.4 mm minimum cable bend radius.
• Verify probe gap, target geometry, polarity and monitor indication after installation.