Home>TSI>Bently Nevada 3500/22M-01-01-01 3500/22M Transient Data Interface

Hot Categories

Bently Nevada 3500/22M-01-01-01 3500/22M Transient Data Interface

Bently Nevada 3500/22M-01-01-01 3500/22M Transient Data Interface

Item NO.: 3764563

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameBently Nevada 3500/22M-01-01-01 3500/22M Transient Data Interface
  • Item NO.3764563
  • Weight1.0000 kg = 2.2046 lb = 35.2740 oz
  • CategoryTSI
  • BrandBently Nevada
  • Creation Time2026-09-08
3500 machinery protection | copper Ethernet TDI

Bently Nevada 3500/22M-01-01-01 3500/22M Transient Data Interface

A standard 3500 transient-data interface with 10Base-T/100Base-TX Ethernet I/O and CSA/NRTL/C approval selection.

BrandBently Nevada
Model3500/22M-01-01-01
Product Type3500/22M Transient Data Interface
01

Product Profile

3500/22M-01-01-01 identifies a standard Bently Nevada 3500/22M Transient Data Interface with copper 10Base-T/100Base-TX Ethernet I/O and CSA/NRTL/C Class I, Division 2 approval.

The TDI occupies the interface position in a 3500 rack and links rack configuration, acquisition and condition-monitoring software to the installed monitoring modules.

02

Technical Data

Manufacturer Bently Nevada, a Baker Hughes business
Model Identifier 3500/22M-01-01-01
Catalog Ordering Pattern 3500/22-01-01-01
Product Family 3500 Series Machinery Protection System
TDI Type Standard monitoring applications, code 01
I/O Module 10Base-T/100Base-TX Ethernet, code 01
Agency Approval CSA/NRTL/C, Class I, Division 2, code 01
Ethernet Connector RJ-45
Ethernet Standard IEEE 802.3, 10Base-T / 100Base-TX
Ethernet Cable Length 100 m maximum
Front-panel Interface USB-B
Front-panel Baud Rate 115.2 kbaud maximum, auto-baud capable
Protocols BN Host Protocol and BN TDI Protocol over Ethernet TCP/IP
Rack Space One full-height front slot and one full-height rear slot
Operating Temperature -30 to +65 °C
Storage Temperature -40 to +85 °C
Humidity 95%, non-condensing
03

System Role

  • Provides the communications interface between the 3500 rack and configuration or data-acquisition software.
  • Supports System 1 condition-monitoring and diagnostic software through the BN TDI protocol.
  • Carries current values, scheduled waveform captures and alarm-event data when the corresponding dynamic-data capacity is enabled.
  • Pairs the front TDI module with the rear copper Ethernet I/O module.
  • Uses the front USB-B connection for local communications and the rear RJ-45 port for Ethernet networking.
04

Compatibility

  • Install the TDI module in its designated full-height front slot with the matching I/O module in the rear slot.
  • Use shielded Category 5 cabling with RJ-45 connectors for the 10Base-T/100Base-TX option.
  • When upgrading from a 3500/20 RIM, remove the RIM and its I/O module before inserting the TDI I/O and TDI modules.
  • Check compatibility of existing 3500 M monitor modules before a RIM-to-TDI upgrade.
  • Apply the selected CSA/NRTL/C approval requirements to the complete rack installation.
05

Applications

  • Rack configuration and communication for 3500 machinery-protection systems.
  • Transfer of steady-state and transient dynamic data to supported condition-monitoring software.
  • Ethernet-connected machinery monitoring using 10Base-T or 100Base-TX infrastructure.
  • Upgrade projects that replace a 3500/20 Rack Interface Module after compatibility review.
06

FAQ

Which Ethernet interface is selected for 3500/22M-01-01-01?

3500/22M-01-01-01 uses 10Base-T/100Base-TX Ethernet with an RJ-45 connector.

What does the first 01 option identify on 3500/22M-01-01-01?

It selects the standard Transient Data Interface for standard monitoring applications.

Which approval is encoded in 3500/22M-01-01-01?

The final 01 option selects CSA/NRTL/C Class I, Division 2 approval.

How much rack space does 3500/22M-01-01-01 require?

The TDI requires one full-height front slot and its I/O module requires one full-height rear slot.

Can 3500/22M-01-01-01 directly replace a 3500/20 RIM without removing the old I/O module?

No. Remove the RIM and RIM I/O first, then insert the TDI I/O module followed by the TDI.

What catalog order-string is associated with 3500/22M-01-01-01?

The 3500/22M family uses the order pattern 3500/22-01-01-01 for this standard copper-Ethernet, CSA/NRTL/C configuration.

You May Also Like