Conditions six configured RTD or thermocouple signals for protection monitoring.
Product Overview
3500/60 is a six-channel Bently Nevada temperature monitor that accepts RTD or thermocouple inputs and compares conditioned measurements with programmable alarm setpoints.
The 3500/60 execution has no recorder outputs; recorder-output capability belongs to the 3500/61. The corresponding I/O architecture may be non-isolated RTD/TC, isolated thermocouple or internal-barrier as ordered.
Front monitor, rear I/O module, sensor type, rack configuration and channel alarms must be recorded as one protection chain.
Performance
Compares temperature measurements with programmable alert and danger setpoints.
Communicates essential temperature and status information to the 3500 rack system.
Supports adjacent three-monitor arrangements for approved TMR applications.
Technical Details
ManufacturerBently Nevada
Exact model3500/60
Product typeSix-channel temperature monitor
InputsRTD or thermocouple
Recorder outputsNone on 3500/60
Alarm functionProgrammable alert and danger comparison
TMR arrangementMonitors installed adjacent in groups of three
Operating temperature with normal I/O−30 to +65 °C
Operating temperature with internal barrier I/O0 to +65 °C
Monitor dimensions241.3 × 24.4 × 241.8 mm
Rack spaceOne front slot
I/O locationOne corresponding rear slot
System Integration
- Export channel types, ranges, setpoints, voting logic and rack configuration.
- Record the exact front monitor and rear I/O part numbers before removal.
- Confirm whether the installation is non-isolated, isolated thermocouple or internal-barrier.
- Test each temperature input, fault diagnostic, alarm and associated relay logic before service.
Applications
- Bearing, casing and process temperature monitoring on critical rotating machinery.
- Six-point RTD or thermocouple protection groups in 3500 racks.
- TMR temperature-monitor arrangements using approved adjacent-slot architecture.
- Replacement where front monitor, rear I/O and channel configuration are documented.
FAQ
Does 3500/60 provide recorder outputs?
No. The manufacturer distinguishes 3500/60 without recorder outputs from the 3500/61 execution that includes them.
What information prevents the wrong rear I/O from being selected for 3500/60?
Provide the rear I/O part number, termination style, isolation type, sensor types and rack-slot photographs.
How should mixed RTD and thermocouple channels be documented for 3500/60?
Record the sensor type, lead arrangement or polarity, configured range and alarm setpoints for every channel.
What is required for a 3500/60 TMR installation?
Verify the approved adjacent three-monitor layout, matching configuration and voting design rather than assuming any three modules form a TMR group.
What proves 3500/60 is ready after replacement?
Confirm exact monitor and I/O identities, stable channel readings, correct fault response and passed alert, danger and relay tests.
About IndustryParts
https://www.industryparts.com/Monitor, rear I/O and six channel records stay together
IndustryParts prepares 3500/60 enquiries around the complete rack position, I/O execution and sensor configuration.
- Recorder-free execution confirmed
- Rear I/O identity requested
- Six-channel settings retained
