Bently Nevada 3701/44 175794-01 Simplex Terminal Base
A submitted terminal-base service reference for the ADAPT 3701/44 Aeroderivative Monitor architecture.
Product Profile
3701/44 175794-01 combines the ADAPT 3701/44 monitor family with a submitted terminal-base suffix. The shared simplex terminal-base identity is 175794, so the final -01 characters should be matched to the installed label before supply.
The terminal base is the mounting and wiring foundation for the processor, input and optional relay modules. It should be treated as an assembly interface rather than as a signal-processing card.
Technical Data
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Submitted Reference | 3701/44 175794-01 |
| Base Part Number | 175794 |
| Host Family | 3701/44 ADAPT Aeroderivative Monitor |
| Component Type | Simplex terminal base |
| Processor Arrangement | Single processor-module support |
| Module Support | Input modules and optional output module |
| Mounting Method | Bulkhead or enclosure sub-panel |
| Power Architecture | Primary and secondary DC input connectors |
| Exact-Suffix Check | Physical base label required |
System Role
- Provides the mechanical mounting point and field-termination interface for the monitor modules.
- Carries power, sensor, discrete-control and relay connections associated with the configured assembly.
- Maintains the defined module alignment and connector relationship for a simplex monitor.
- Supports distributed installation close to the aeroderivative machine package.
Compatibility
- Match the complete base label, connector layout and monitor family before replacement.
- Record processor, input and output module part numbers and positions.
- Verify power redundancy, discrete inputs, grounding and any intrinsic-safety earth arrangement.
- Do not treat a duplex terminal base or another 3701 application variant as a direct mechanical substitute.
Applications
- Aeroderivative gas-turbine protection and condition-monitoring assemblies.
- Replacement of a damaged simplex mounting and termination base.
- Monitor rebuilds that preserve the documented module population and field wiring.
FAQ
Why is the suffix on 3701/44 175794-01 important?
The full installed label should confirm whether -01 denotes the required service execution rather than relying on the shared base number alone.
Does 3701/44 175794-01 include the processor and input modules?
The supply scope must be stated explicitly; the terminal base is a distinct component and the installed modules have their own part numbers.
Can a duplex base replace 3701/44 175794-01?
No like-for-like assumption is appropriate because processor count, connectors, mounting and configuration architecture differ.
What photographs are needed for 3701/44 175794-01?
Provide the front and rear base labels, connector field, mounting points, module population and complete monitor nameplate.
What wiring records should be retained for 3701/44 175794-01?
Preserve power inputs, sensor terminals, discrete controls, relay circuits, grounding and external communication connections.
What tests follow a 3701/44 175794-01 base exchange?
Verify module seating, power paths, every channel, discrete input, relay circuit, network and the validated protection shutdown logic.
Recommended Models
| 5WG1512-1AB01 | G50BS166MHCR3C + E84DGDVB11242PS | X20DOD322 |
| ESB 24-04 | IMP3ICM-1E | PASTE10-M 303531 07065589 |
| 6SX7002-0AN00-1AF0 | XCS-TE5512 | 2711P-T10C22D8S |
| 82261-01A | 1FT5066-1AF71-4EA0 | TB40-100-00000-D35 / 845696010001 |
| IP20 | ABB DIM-LE 1.1400.0.10 1SKD 340000 R1400 | PT-SFP-GE-L |
| 6197/51-515 | 6ES5928-3UA21 | AB7702-B MB100 9-28VDC |
| WAGO 284-607 | RF47 DRE100L2/LN | 3800033-340SE |
| HTE200B12C2 | SXWPS24VX10001 | R5390 |
| PXI-GPIB | ESSER 804868 | EC5000 |
| RZB01.2-UN | KA37 CMP50S/BK/KY/RH1M/SB1 | 3RT1044-1AD00 |
