Bently Nevada 60R/CGW01 Communication Gateway Module
The base ordering code for a one-slot Orbit 60 Ethernet gateway serving external control and automation hosts.
Product Identification
60R/CGW01 identifies the Orbit 60 Communication Gateway Module family. It publishes measurements, alarms, status and system-control information to external hosts while keeping the gateway role separate from the protection processor.
An exact order requires hazardous-area and SIL-option suffixes. The installed approval marking and complete nameplate must therefore be captured before quotation.
Engineering Data
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Ordering Family | 60R/CGW01-AAA-B |
| Submitted Base Code | 60R/CGW01 |
| Module Type | RJ-45 Ethernet communication gateway |
| Rack Space | 1 slot |
| Ethernet Ports | 2 independent ports |
| Ethernet Rate | 1000/100/10 Base-T, auto-negotiation |
| Connector | RJ-45 |
| Maximum Cable Length | 100 m |
| Supported Protocols | Modbus TCP/IP, EGD and PROFINET |
| Maximum Power Consumption | 10.2 W |
| Typical Power Consumption | 6.8 W |
| Approval Field | AAA suffix required |
| SIL Field | B suffix required |
Functions
- Provides protocol access for HMI, unit-control and plant automation systems.
- Modbus operates as a server with configurable addresses in the 40000 range.
- EGD supports integration with compatible GE control platforms.
- PROFINET operation uses Port A as a device interface for the supported control connection.
Applications
- Orbit 60 data exchange with a DCS or HMI
- EGD integration with compatible GE controls
- PROFINET connection to an automation controller
Lifecycle
- Archive both Ethernet configurations, protocol maps and controller files.
- Track the complete approval suffix with the installed module.
- Review network access, switch settings and protocol ownership during system changes.
FAQ
Is 60R/CGW01 a complete orderable code?
It is the gateway family base; the hazardous-area and SIL option fields must be added for an exact module.
Which protocol should be selected for 60R/CGW01?
Choose according to the external host and engineered data flow: Modbus server, EGD exchange or the supported PROFINET device connection.
Can 60R/CGW01 replace the Orbit 60 protection processor?
No. The gateway exposes system information to external hosts but does not replace the dedicated protection-processing architecture.
What mapping information is needed for a 60R/CGW01 replacement?
Preserve the protocol configuration, point list, data types, byte order, polling or update behavior and controller-side project.
What network evidence should accompany a 60R/CGW01 enquiry?
Provide the full module label, approval marking, both port roles, connected host, protocol, firmware context and current configuration backup.
What should be tested after replacing 60R/CGW01?
Verify module and link status, IP settings, protocol session, measurement scaling, alarm states and any permitted system-control commands.
