go on
Home>TSI>Bently Nevada 991-06-70-03-05 Metric Thrust Transmitter

Hot Categories

Bently Nevada 991-06-70-03-05 Metric Thrust Transmitter

Bently Nevada 991-06-70-03-05 Metric Thrust Transmitter

Item NO.: 3776241
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameBently Nevada 991-06-70-03-05 Metric Thrust Transmitter
  • Item NO.3776241
  • Weight1.0000 kg = 2.2046 lb = 35.2740 oz
  • CategoryTSI
  • BrandBently Nevada
  • Creation Time2026-09-22
991 THRUST TRANSMITTER | 0.6 MM RANGE | MULTIPLE APPROVALS

Bently Nevada 991-06-70-03-05 Metric Thrust Transmitter

A metric-range 7 m thrust transmitter supplied for DIN or bulkhead mounting with the broad approval option.

BrandBently Nevada
Model991-06-70-03-05
Product Type991 Thrust Transmitter
01

Product Profile

991-06-70-03-05 is configured for a 0.6-0-0.6 mm axial-position range and a 7 m 3300 NSv transducer system. Mounting option 03 supplies both 35 mm DIN-rail clips and bulkhead screws.

Approval option 05 covers the documented CSA Division 2, ATEX Zone 0, ATEX Zone 2 and ABS maritime selections for this transmitter execution.

02

Technical Data

Manufacturer Bently Nevada, a Baker Hughes business
Complete Model 991-06-70-03-05
Product Family 991 Thrust Transmitter
Measurement Range 0.6-0-0.6 mm
System Length 7.0 m
Mounting Hardware DIN-rail clips and bulkhead screws
Approval Selection CSA, ATEX and ABS maritime options
Signal Output 4–20 mA axial position
Diagnostic Access PROX OUT and COM connection
Humidity Protection Potted for condensing environments
03

System Role

  • Converts the matched NSv proximity signal into a control-system current loop.
  • Provides local zero, span and diagnostic access during commissioning.
  • Signals transducer-chain faults through low-current Not OK behavior.
04

Compatibility

  • Use a 3300 NSv probe and extension cable totaling 7 m.
  • Keep the metric span aligned with control-system scaling and alarm setpoints.
  • Select DIN or bulkhead mounting without altering wiring clearances.
  • Verify the applicable approval certificate and installation requirements for the destination site.
05

Applications

  • Metric axial-position monitoring on compressors, pumps, motors and fans.
  • Marine or hazardous-area packages requiring the exact approval execution.
  • OEM machinery using a loop-powered transmitter instead of rack-based conditioning.
06

FAQ

Which approval documents should be requested with 991-06-70-03-05?

Request the documents applicable to the actual destination, including the relevant CSA, ATEX or ABS marking and installation conditions.

Can 991-06-70-03-05 replace a 25 mil range transmitter?

Do not assume so. Confirm engineering-unit scaling, alarm thresholds, calibration span and controller logic before any range change.

Does 991-06-70-03-05 support both mounting methods?

Yes, option 03 supplies DIN-rail clips and bulkhead screws, but the enclosure and wiring layout still require verification.

What is required to preserve the 7 m system for 991-06-70-03-05?

The NSv probe length plus extension-cable length must equal the Proximitor system length selected by the transmitter.

What should a receiving inspection for 991-06-70-03-05 include?

Check the complete suffix, approval markings, terminals, mounting hardware, calibration controls and physical condition before installation.

What field tests should close a 991-06-70-03-05 replacement?

Document gap, diagnostic voltage, zero and span, 4–20 mA scaling, Not OK current and every alarm or shutdown action.

You May Also Like