Bently Nevada SCOUT220-IS Portable Data Collector
A two-channel simultaneous vibration collector for hazardous-area route work, dynamic analysis and System 1 data transfer.
Product Overview
SCOUT220-IS is the two-channel member of the Bently Nevada SCOUT200 intrinsically safe portable data-collector family. Its acquisition module communicates by Bluetooth with an industrial handheld running the S1 Collector application.
It supports on-route and off-route vibration collection, tachometer or Keyphasor triggering and transfer of routes and results with System 1. The handheld device is a separate selection and the complete hazardous-area system rating is limited by its least-rated component.
Performance
- Samples two sensor channels simultaneously for route collection and cross-channel measurements.
- Supports spectra, waveforms, synchronous sampling, peak demodulation, coast-down, run-up, interval capture and 6Pack measurements.
- Provides cross-channel phase, FRF and two-plane balancing workflows with the required sensors and accessories.
- Operates for about ten hours in typical route collection and transfers data through the paired handheld.
Technical Details
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Model | SCOUT220-IS |
| Simultaneous Sensor Channels | 2 |
| Sensor Types | Acceleration, velocity, displacement and voltage |
| Input Coupling Ranges | AC: 16 V peak-to-peak; DC: 0–20 V, -10–10 V or -20–0 V |
| Connectors | Two sensor LEMO inputs plus Tach/Keyphasor LEMO input |
| A/D Conversion | 24-bit |
| Sensor Excitation | 0 or 2.2 mA configurable; 24 V maximum |
| Tachometer Speed Range | 3 to 1,200,000 rpm |
| Maximum Fmax | 80 kHz |
| Spectral Resolution | Up to 6400 lines on one channel; 3200 on two channels |
| Dynamic Signal Range | Greater than 95 dB typical at 400 lines |
| Bluetooth | BT 4.0 Classic through serial 101599; BT 5.0 BLE from serial 101600 |
| Battery | 7.4 V, 3920 mAh custom lithium-ion; factory replaceable |
| Typical Route Operating Time | 10 hours |
| Charge Time | Approximately 3 hours |
| Environmental | -20 to 60 °C; 50 °C maximum in Ex areas |
| Ruggedness | IP65; 1.2 m concrete-drop test |
| Ordering | SCOUT220IS-AA; approval option required |
| Handheld | Not included in the collector kit |
System Integration
- Use a tested industrial handheld and compatible S1 Collector release; Bluetooth generation depends on collector serial number.
- Select only sensors, cables, handhelds and accessories permitted by the hazardous-location installation-control drawing.
- Confirm System 1 version, route-transfer method, user access and mobile-device security controls.
- For calibration traceability, distinguish standard test data from a separately requested metrology service.
Applications
- Hazardous-area machinery vibration routes
- Two-channel phase and balancing measurements
- Portable analysis of motors, pumps, fans, compressors and gearboxes
- System 1 route collection and condition-monitoring programs
FAQ
When should SCOUT220-IS be selected instead of SCOUT240-IS?
Choose the two-channel model when simultaneous two-input work meets the route and analysis plan; four-channel or triaxial work requires the 240 model.
Does SCOUT220-IS include the industrial handheld?
No. Select a tested handheld and its hazardous-area rating separately, and confirm operating-system and Bluetooth compatibility.
Can any accelerometer be connected to SCOUT220-IS in a hazardous area?
No. The sensor, cable and handheld must comply with the installation-control drawing, and the whole system inherits the lowest protection rating.
What software information is needed for a SCOUT220-IS quotation?
Provide System 1 and S1 Collector versions, route workflow, handheld type, collector serial number and required support or metrology scope.
How does the SCOUT220-IS serial number affect handheld selection?
Earlier collectors use Bluetooth Classic, while later units use Bluetooth Low Energy; this changes compatible devices and operating-system support.
What incoming checks are useful for SCOUT220-IS?
Verify approval label, serial number, battery, charger, two input channels, tach input, Bluetooth pairing, route transfer and requested calibration records.
Recommended Models
| 2TMA200160B0003 | FC-102N110T4E2MH4XLCXXXSXXA0BXCXXXXD0 | TCP-LBF-IA1.36.IE.1 241312 |
| GSBF02R12-502 | BIM-EG08-AP6X-H1341 | 671368.752 |
| OO5004 | 1756-L63 PN:13835 | 330180-91-05 |
| HC44DT/5,1-AS1F1/340-BWH1F-N4N4-CZ1/240/5RK-1-1-X24 | E5AN-HAA2HBMD-500 | ABB SDCS-APD-2 |
| HF6587 | D 4100F3240G46 | ABB EIB AT/S 8.16.5 |
| HSFP-03-3831M-22F | M-AF-M210.04 | 820BA231 |
| ABB 6197-102-500 | Hilscher 1050.361 | STEP-PS/1AC/24DC/2.5 |
| AUTA 715403 | HIMA F 8606 | SUR353-7 B933009 |
| 8B0M0130HW00.000-1 | TR1A1A1B00 03 00 TR00000087 | DH13-100-4-I0F |
| X67BC8513.L12 | C1250-IP-XC-1S-000 | MPS10-3x400-500/24 |
