Emerson 73-610-096 DeltaV S-Series DC/DC Component Power Supply
A DeltaV S-Series component power supply with selectable 24 V or 12 V input ratings and regulated 12 V, 5.1 V and 3.4 V outputs.
Product Identification
73-610-096 is an Emerson DeltaV S-Series DC/DC component power supply. Certified ratings cover 24 V DC and 12 V DC input modes, with separate 12 V, 5.1 V and 3.4 V output rails.
It is a component supply intended for incorporation into approved equipment. The complete label, input mode, host assembly, airflow and alarm-contact wiring must therefore be checked as part of the system rather than treating the power supply as a stand-alone field device.
The complete 73-610-096 label controls the certified input and output profile and the host-equipment integration record.
Engineering Data
- Product type
- DC/DC component power supply
- 24 V input rating
- 6.1 A at 24 V DC, ±20%
- 12 V input rating
- 14.8 A at 12 V DC, −4% / +5%
- 12 V output on 24 V input
- 8 A
- 12 V output on 12 V input
- 13 A
- Auxiliary outputs
- 5.1 V at 2 A; 3.4 V at 2 A
- Combined auxiliary output limit
- 10.2 W maximum for 5.1 V and 3.4 V rails
- Alarm contacts
- 30 V DC, 2 A
- Operating range
- −40 to +70 °C, with output derating at 70 °C
- Installation classification
- Component power supply for incorporation into approved equipment
Functions
Convert cabinet DC power
Produces the required 12 V, 5.1 V and 3.4 V rails from the approved DC input.
Expose supply status
Alarm contacts provide a defined interface for host-equipment supervision.
Support extended environment
The certified component range covers low-temperature startup and high-temperature derated service.
Applications
DeltaV S-Series cabinet power
Use within the identified host assembly and approved environmental design.
Controlled power-supply exchange
Match input mode, rail loading and connector record before removing the installed unit.
Approved enclosure integration
Maintain the host enclosure, protection and cooling conditions required by the certification.
Lifecycle
Record
Capture 73-610-096, host assembly, input mode, output loads, connectors and alarm wiring.
Assess
Calculate rail loading and confirm airflow, ambient temperature and enclosure protection.
Exchange
Isolate all input sources and follow the approved cabinet energy-control procedure.
Verify
Measure output rails, confirm alarm operation and monitor the host system under normal load.
About IndustryParts
https://www.industryparts.com/Controlled handling for 73-610-096
IndustryParts keeps the submitted 73-610-096 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Suffix and MOD identity kept visible
- Mating hardware recorded before supply
- Acceptance evidence linked to the order
FAQ
Can 73-610-096 be treated as a stand-alone power supply?
No. Its certifications identify it as a component power supply whose suitability is determined in the host equipment.
What input record is needed for 73-610-096?
Provide the selected 24 V or 12 V mode, source tolerance, protection and measured cabinet load.
Why must all output rails be documented for 73-610-096?
The 12 V rating changes with input mode and the 5.1 V plus 3.4 V outputs share a 10.2 W combined limit.
What should accompany a 73-610-096 request?
Send the complete label, host cabinet identity, connector photographs, rail loads and alarm-contact arrangement.
What proves 73-610-096 is ready after exchange?
Document stable 12 V, 5.1 V and 3.4 V rails, normal alarm state and correct host operation under load.
