Emerson EZ1900-040 Unarmored 4.0 m Extension Cable
An EZ190 extension cable with no armor and a 4.0 m length code for an AMS EZ 1000 transducer chain.
Product Identification
The complete Emerson EZ1900-040 string resolves to the EZ190 extension-cable family, 0 for unarmored construction and 040 for a 4.0 m cable.
This cable length is combined with the integral sensor lead to form an approved 4–10 m system total. The driver and sensor identities therefore remain part of cable selection.
A 4.0 m extension is not equivalent to the 4.5 m variant: preserving the final code avoids shifting the calibrated system-length boundary.
Engineering Data
Emerson
EZ1900-040
EZ190
0 — unarmored
040
4.0 m
AMS EZ 1000 eddy-current system
4 through 10 m in one-metre steps
Functions
Remote driver connection
Extends the physical path between the sensor lead and the EZ 1000 driver location.
System-length completion
Contributes exactly 4.0 m to the documented sensor-plus-extension total.
Ordering-code traceability
The final 040 field keeps the cable distinguishable during storage and maintenance.
Signal-chain continuity
Maintains the specified connector route when selected as part of the complete transducer system.
About IndustryParts
https://www.industryparts.com/Traceable handling for EZ1900-040
IndustryParts keeps the submitted EZ1900-040 identity, quantity and installed-system evidence together so the proposed supply can be checked before dispatch.
Suffix and revision kept visible
Installed application boundary documented
Supply record linked to the exact enquiry
Applications
Machine monitoring cabinets
Routes an EZ 1000 sensor connection to a protected driver location within the approved total length.
Retrofit cable replacement
Restores an existing 4.0 m extension without altering the documented measurement-chain length.
Spare standardization
Supports controlled stocking where full cable codes remain tied to specific sensor systems.
Lifecycle
Identify
Record sensor, extension and driver labels plus the integral and extension lengths.
Install
Protect the unarmored route, seat clean connectors and avoid stress, sharp bends and unintended grounding.
Verify
Check gap voltage, stable signal response and routing condition against the previous accepted baseline.
FAQ
Q01
How is EZ1900-040 decoded?
+
EZ190 is the extension-cable family, the following 0 selects no armor, and 040 specifies 4.0 m.
Q02
Can EZ1900-040 be selected without the sensor lead length?
+
No. The sensor and extension lengths combine to form the manufacturer-supported total system length.
Q03
What is the key difference between EZ1900-040 and EZ1900-045?
+
The extension lengths are 4.0 m and 4.5 m respectively; that difference changes the assembled transducer-chain length.
Q04
Does EZ1900-040 need mechanical protection in the field?
+
Its ordering code is unarmored, so the installation route must provide the protection required by the site design.
Q05
What documentation should remain after fitting EZ1900-040?
+
Retain the full three-part chain identity, route inspection, connector condition, gap voltage and functional signal test.
