Emerson EZ1900-045 Unarmored 4.5 m Extension Cable
An AMS EZ 1000 extension-cable execution in which the armor field is 0 and the cable-length field is 045.
Technical Summary
Emerson EZ1900-045 is an EZ190 extension cable for an AMS EZ 1000 eddy-current measurement chain. The first 0 after EZ190 selects no armor, while 045 defines a 4.5 m cable.
The extension cable is selected together with the sensor and driver so the combined system length is one of the manufacturer-supported totals. A matching connector and documented routing are part of that chain.
Because nearby EZ1900 order codes differ only by their final length field, the complete suffix must remain visible on the enquiry, packing record and installed cable label.
Specifications
Emerson
EZ1900-045
EZ190 extension cable
0 — no armor
045
4.5 m
AMS EZ 1000 sensor, extension cable and driver
4, 5, 6, 7, 8, 9 or 10 m
Features
Length-defined execution
The 045 suffix fixes the extension section at 4.5 m and distinguishes it from adjacent EZ1900 variants.
Unarmored construction
Ordering position 0 identifies the version without cable armor.
Calibrated-chain selection
The cable is chosen as a component of the complete sensor and driver length, not as an isolated lead.
Serviceable connector path
The extension separates the sensor lead from the driver location while retaining a documented interconnection.
About IndustryParts
https://www.industryparts.com/Traceable handling for EZ1900-045
IndustryParts keeps the submitted EZ1900-045 identity, quantity and installed-system evidence together so the proposed supply can be checked before dispatch.
Complete label retained with the enquiry
Host-system evidence reviewed before quotation
Requested quantity tied to the exact model record
Compatibility
Length arithmetic
Add sensor integral length and 4.5 m extension length, then confirm a supported total for the installed system.
Connector identity
Compare both mating connector families, keying and condition before accepting the cable.
Route and protection
Confirm bend radius, separation, grounding practice and whether the existing route requires armored construction.
Replacement
Record both cable ends
Photograph the sensor-side and driver-side connections plus the complete EZ1900-045 label.
Verify the complete chain
Reconcile sensor length, extension length, driver type and programmed scale before installation.
Test after routing
Inspect connectors, verify stable gap voltage and compare vibration response with the accepted baseline.
FAQ
What does the 045 field mean in EZ1900-045?
It is the manufacturer ordering code for a 4.5 m extension-cable length.
Is EZ1900-045 supplied with protective armor?
No. The 0 armor position identifies the unarmored EZ190 extension-cable construction.
Can EZ1900-045 replace EZ1900-040 merely because the connectors match?
No. The extension differs by 0.5 m, changing the total sensor-system length; confirm the complete calibrated chain before substitution.
What should be sent with a EZ1900-045 quotation request?
Provide sensor, extension and driver labels, integral sensor-cable length, required total system length, connector photographs and the cable route.
Which checks close a EZ1900-045 cable change?
Confirm connector seating, route protection, continuity where permitted, stable gap voltage and an acceptable signal response at the driver.
