Emerson / GE Fanuc IC200CPUE05-EH CPU with Ethernet Interfaces, EH Revision
An EH-labelled VersaMax CPUE05 controller combining CPU, Ethernet and serial communication functions.
Product Identification
IC200CPUE05-EH identifies the EH-labelled execution of the VersaMax IC200CPUE05 CPU with Ethernet interfaces. The base product combines controller execution, embedded Ethernet and two serial communication standards.
The CPU supports configurable memory up to 64 KB, system-flash and battery-backed RAM storage, floating-point instructions and a typical Boolean rate of 0.8 ms per 1K.
EH is retained as the exact hardware suffix. A service decision must compare the full controller label, firmware, project, I/O station and network configuration instead of relying on the base IC200CPUE05 number alone.
Engineering Data
Functions
Application control
Executes the configured VersaMax logic and coordinates I/O data.
Ethernet services
Provides SRTP and configured EGD communication through the embedded RJ45 port.
Serial services
Connects approved RS-232 and RS-485 devices through the documented port setup.
About IndustryParts
https://www.industryparts.com/Exact-model handling for IC200CPUE05-EH
IndustryParts keeps the complete IC200CPUE05-EH identity, requested quantity and installed-system evidence together so the proposed supply can be checked against the actual application before dispatch.
Applications
Compact automation cell
Combines CPU and communications in a modular VersaMax station.
Supervisory integration
Exchanges controller data with documented HMI, SCADA and peer nodes.
EH-revision maintenance
Supports like-for-like service where exact suffix and firmware identity are controlled.
Lifecycle
Archive
Keep project, firmware, label, network settings and retained data in one service record.
Maintain
Monitor battery condition, connector condition, grounding and station power budget.
Commission
Verify control logic, complete I/O, serial paths, Ethernet exchanges and recovery behavior.
FAQ
Q01Is the EH suffix optional when ordering IC200CPUE05-EH?
No. Use the complete IC200CPUE05-EH label so hardware and firmware compatibility can be reviewed against the installed controller.
Q02Which communications are embedded in IC200CPUE05-EH?
The IC200CPUE05 base controller provides Ethernet plus RS-232 and RS-485 interfaces.
Q03What EGD information is needed for IC200CPUE05-EH?
Provide every configured exchange, producer or consumer role, destination, timing, data range and expected status behavior.
Q04Can an LT-labelled CPUE05 replace IC200CPUE05-EH without testing?
No. Even with the same base catalog, suffix, firmware, project support and operational notes must be compared and commissioned.
Q05Which tests close a IC200CPUE05-EH service job?
Record project identity, controller modes, complete I/O operation, serial links, SRTP/EGD communications, clock, retained data and safety interlocks.
