Controls 32 sourcing outputs for compatible DC actuators and indication circuits.
Product Overview
IC200MDL750K is a VersaMax modular I/O output module that switches 32 positive-logic DC loads in a compact control station.
The family rating is 12/24 VDC at 0.5 A per point. The K suffix is part of the exact replacement identity and should remain on purchase and maintenance records.
Performance
Organizes the outputs as two groups of sixteen for field-power distribution.
Uses modular VersaMax carrier construction to reduce control-panel footprint.
Provides point status indication for commissioning and maintenance checks.
Technical Details
| Manufacturer | Emerson / legacy GE Fanuc |
|---|---|
| Platform | VersaMax Modular I/O |
| Module function | DC positive-logic discrete output |
| Output count | 32 points |
| Output grouping | Two groups of sixteen |
| Rated voltage | 12/24 VDC |
| Output rating | 0.5 A per point |
| Mechanical interface | VersaMax carrier and compatible terminal base |
| Hardware revision | K |
System Integration
- Record both group commons, load supplies and terminal numbering before removing the installed module.
- Verify the carrier and terminal-base contacts, then fit the K revision module without forcing the connectors.
- Confirm the PLC hardware configuration and output mapping before energizing load power.
- Commission one output at a time and measure real load current rather than relying only on the status indicator.
Applications
- Compact machine I/O stations driving solenoids, interposing relays and pilot devices.
- Distributed VersaMax nodes that require 32 positive-logic 12 or 24 VDC outputs.
- Legacy controls where the installed K revision and terminal-base combination must be maintained.
FAQ
What load details are needed for an IC200MDL750K enquiry?
Provide load voltage, steady and inrush current, suppression method, both group supplies and the existing carrier and terminal-base identities.
Can IC200MDL750K switch a load that draws less than 0.5 A steady state but has high inrush?
Steady current alone is insufficient; compare the actual inrush profile and duty cycle with the module and load documentation before approval.
Should IC200MDL750K outputs be tested with field power disconnected?
Logic and configuration can be checked first, but final acceptance requires controlled testing with the correct field supply and connected load or approved simulator.
What signs suggest a field problem rather than an IC200MDL750K fault?
Check blown protection, missing group common, low field voltage, shorted loads and failed suppression before attributing several points to the module.
What should incoming inspection cover for IC200MDL750K?
Verify the K suffix, housing, carrier contacts, terminal-base fit and absence of heat, corrosion or impact damage.
About IndustryParts
https://www.industryparts.com/Output loading is reviewed before the shutdown
IndustryParts keeps the IC200MDL750K revision, carrier and two output-group supplies visible during replacement planning.
- K revision retained
- Load evidence reviewed
- Terminal system matched
Recommended Models
| 6ES5 095-8MB02 | 20AE3P9A0AYNNNC0 | CR5-20 E-FGJ-A-E-HQQE |
| RS485 | Belkin F5L049 | A05B-1523-B202 |
| HID 70200AEP0N | X67AI1323 | Gneuss DAIL-2E3-18A-B35Z-S1-F5-RW-8D-080 |
| MAS51A010-503-50 | 3HE09327AARA01 APSP31B33IDL-10NA | KUKA KC1 01052197 |
| Siemens 6SL3710-1GE36-1AA3-Z | EDRE100M4/FF/2GD/KCC/TF/AL | SV16B 960160V3003 |
| WN136269 MH10MDG | HPBYB8A 316SS-PTFE | BCC0HNP |
| ABB PM554-TP 1SAP120600R0001 | GHG 137 | FTL51-HJDM3/0 |
| BAU200 | ZSPF-ALC | ACS880-01-065A-5+E202+P909 |
| M300-AD4 | DFV100L/BMG/TF/EV2T/H3GD | NR500-S3G |
| 230V.60V-1.3A | GE 116B6708G43A73A4 | ECP34 2S4 |
