RX3I HIGH-DENSITY CURRENT INPUT · LT-GD EXECUTION
Emerson GE Fanuc IC694ALG223LT-GD PACSystems RX3i Sixteen-Channel Current Input Module
A complete LT-GD suffix execution of the sixteen-channel RX3i current-input module, held intact for compatibility and qualification review.
Product Identification
IC694ALG223LT-GD retains the full LT-GD suffix on Emerson base catalog IC694ALG223. Manufacturer data for the base module identifies sixteen single-ended current inputs supporting 0–20 mA and 4–20 mA, 12-bit resolution and a 13 ms published update time.
Public manufacturer data does not separately assign characteristics to LT-GD. Those characters are therefore treated as controlled execution evidence, not decoded into unsupported claims; compatibility is decided from the installed label, approvals, rack and project record.
Engineering Data
Functions
Sixteen process loops
Provides high-density acquisition for single-ended current inputs.
Two published current ranges
Supports both 0–20 mA and 4–20 mA family configurations.
External power awareness
The module’s 24 VDC demand is considered separately from connected loop current.
Execution-level control
LT-GD is retained even when only base-family electrical data is publicly available.
Applications
Process transmitter acquisition
Collecting documented 0–20 mA or 4–20 mA signals in an RX3i rack.
High-density cabinet design
Consolidating sixteen current loops where terminal and common architecture are approved.
Qualified revision exchange
Replacing an installed LT-GD execution only after the suffix and approval boundary are confirmed.
Lifecycle
Record
Export ranges, scaling and alarms and capture the LT-GD label, slot, terminal and loop-power arrangement.
Separate faults
Use a traceable current source to distinguish module response from transmitter, wiring or 24 VDC supply issues.
Calibrate
Verify every required channel, engineering value, alarm and interlock before returning the process to service.
FAQ
What must accompany an IC694ALG223LT-GD enquiry?
Provide the complete LT-GD label, rack and CPU, project release, terminal assembly, loop map, power source and quantity.
Can a base IC694ALG223 replace IC694ALG223LT-GD automatically?
No. Base-family function does not prove that the LT-GD execution, approvals or revision support can be discarded.
How should loop power be reviewed for IC694ALG223LT-GD?
Document the user 24 VDC supply, transmitter power arrangement, commons and total loop-current demand.
What test separates a field-loop fault from a IC694ALG223LT-GD fault?
Inject a known current at the terminal and compare raw data, scaling and diagnostics while checking the field transmitter separately.
What proves IC694ALG223LT-GD is ready after service?
Retain the exact suffix, project checksum and channel-by-channel injection, alarm and interlock results.
About IndustryParts
https://www.industryparts.com/Exact identity before quotation
IndustryParts prepares IC694ALG223LT-GD enquiries around the complete manufacturer label, requested quantity and destination. For controlled replacements, include the host-system record, field photographs and configuration evidence that apply to this exact execution.
Send the complete IC694ALG223LT-GD label, requested quantity and destination.
