Emerson IC200ALG230J VersaMax Four-Channel 12-Bit Voltage / Current Analog Input Module
A four-channel VersaMax analog input module for voltage or current signals, with the J hardware revision retained.
Product Identification
IC200ALG230J is the J hardware revision of the Emerson VersaMax IC200ALG230 four-channel analog input module. The base module accepts voltage or current signals and converts them at 12-bit resolution.
The J suffix remains part of the spare identity. Carrier type, channel range, scaling and field-terminal record must be retained because another IC200ALG230 revision or a nearby ALG2xx module should not be selected solely from the enclosure.
The complete IC200ALG230J marking links the four-channel base module to the installed hardware revision and I/O record.
Engineering Data
- Product family
- VersaMax modular I/O
- Base catalog number
- IC200ALG230
- Exact revision
- J
- Input channels
- 4
- Signal types
- Voltage or current
- Conversion resolution
- 12 bit
- Installation requirement
- Compatible VersaMax I/O carrier
- Configuration evidence
- Per-channel range and scaling record
Functions
Acquire field analog values
Converts four configured voltage or current signals for the VersaMax station.
Maintain per-channel engineering ranges
Works with controller configuration to scale raw input data into process units.
Preserve revision identity
The J suffix supports traceable spare and firmware/service review.
Applications
Compact process measurement
Use for four documented analog transmitter or voltage-source channels.
Remote VersaMax station
Install on the matching carrier within a supported CPU or NIU architecture.
Controlled spare replacement
Retain channel mapping and full revision evidence before module exchange.
Lifecycle
Capture
Record IC200ALG230J, carrier, station position, channel ranges, scaling and terminal wiring.
Isolate
Follow the approved loop and station isolation procedure before disconnecting conductors.
Restore
Load the retained configuration and verify polarity, commoning and range per channel.
Prove
Apply known input values and document engineering-unit response, diagnostics and alarms.
About IndustryParts
https://www.industryparts.com/Controlled handling for IC200ALG230J
IndustryParts keeps the submitted IC200ALG230J identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Suffix and MOD identity kept visible
- Mating hardware recorded before supply
- Acceptance evidence linked to the order
FAQ
What must be recorded beyond the IC200ALG230J label?
Keep the carrier type, station position and range, scaling and wiring for all four channels.
Can IC200ALG230J be replaced by an IC200ALG260 module?
No direct equivalence should be assumed; channel count, configuration and project hardware identity differ.
What should accompany a IC200ALG230J quotation?
Provide the complete J revision label, carrier identity, channel signal types and controller project record.
How are unused IC200ALG230J channels handled?
Follow the installed project and field-wiring standard; do not infer termination from another module.
What acceptance test suits IC200ALG230J?
Apply traceable voltage or current values at each active channel and verify scaling, diagnostics and alarm behavior.
