Converts controller output words into four field analog signals.
Key Information
IC200ALG320F is a VersaMax analog output module. Emerson lists the IC200ALG320 base catalog number as a four-channel, 12-bit voltage/current analog output module.
The final F is retained as the installed hardware revision. It must remain on the enquiry, test record and replacement label because base-model similarity does not prove revision equivalence.
This module belongs to the modular VersaMax I/O platform used for machine control, light process control and general automation.
Functions
Supports both voltage and current applications within the base-model specification.
Uses the removable VersaMax carrier and terminal arrangement of the installed station.
Keeps the F revision visible for configuration and spare-control records.
Specifications
| Manufacturer | Emerson / legacy GE Fanuc |
|---|---|
| Exact model and revision | IC200ALG320F |
| Platform | VersaMax modular I/O |
| Module function | Analog output |
| Number of channels | 4 |
| Resolution | 12 bit |
| Supported signal class | Voltage / current |
| Revision control | F suffix must be matched or formally approved |
| Form factor | VersaMax carrier-mounted module |
Installation
- Verify the original label, carrier type, terminal arrangement and configured signal range before removal.
- Isolate field power and controller power according to the machine safety procedure.
- Restore channel scaling and output behavior from the approved project rather than copying assumptions from another ALG module.
- Commission each loop with the process in a controlled state and confirm its safe-value behavior.
Lifecycle
- Retain a project backup, loop sheet and channel range record with the spare.
- Inspect carrier contacts and terminal condition whenever the module is exchanged.
- Do not merge IC200ALG320F with IC200ALG321, IC200ALG322 or later high-density variants.
- Record channel-by-channel test evidence before releasing the outputs to automatic control.
About IndustryParts
https://www.industryparts.com/Four analog loops remain tied to one exact revision
IndustryParts handles IC200ALG320F as a revision-controlled VersaMax output module and requests the carrier, loop and project evidence needed for a defensible replacement.
- F revision retained
- Signal ranges recorded
- Loop evidence requested
Related Models
| 37CXL4G5I1 | MCS-325 | Entrelec 18-410051-001CC |
| CRN4-100 A-P-G-BUBE | CTA Center Tech BFL DN65 44607 001 PS16 | KH77B CT100LS4/BMG/HF/TF/ES1S |
| C2C-SA16510A10000 | PSI-MOS-RS232/FO | SFAM-90-10000L-TG1-2SA-M12 |
| 6DS1601-8BA | PNOZ s4.1 | 170M5149 |
| C200HE-CPU42-E | X20 AO 4622 Rev. N3 | TMSR-380-33-U-SB |
| PSR-SPP-24UC/ESAM4 | MN 452-11y-t-M20 | S75 |
| MX21747-040-00 | EL6631-0010 | 901-H510-WW00 |
| PCS245-NB-D24 | VLM-000-SIE | TK 355-20z |
| 045700 | 6FC5110-0BB01-0AA2 | E160X01 |
| 4574821 | BL0T3CW0H2 | SEW CMP50L/KY/AK0H/SM1 BSHF202 |
FAQ
Can IC200ALG320F be quoted from the base number IC200ALG320 alone?
The complete IC200ALG320F label should be supplied. The F revision, carrier and project configuration are needed to keep the replacement boundary traceable.
What evidence should accompany an IC200ALG320F enquiry?
Send clear module and carrier labels, terminal photographs, channel signal ranges, rack or NIU identity, controller project version and required quantity.
How should a stored IC200ALG320F spare be accepted before installation?
Check the revision label, connector and carrier-contact condition, ESD packaging and a traceable functional test appropriate to voltage and current output channels.
What should be protected before exchanging IC200ALG320F?
Protect the controller project, channel scaling, safe output values, interlocks and loop drawings. Record live process dependencies before isolation.
What proves IC200ALG320F is ready for service?
Confirm correct hardware identity, clean controller diagnostics, channel scaling, commanded-versus-measured output and the approved response of every affected loop.
