Provides the local carrier interface for communications hardware in a VersaMax station.
Technical Summary
IC200CHS006H is an Emerson VersaMax local communications carrier. It provides the carrier position used by supported VersaMax communications hardware within the modular I/O architecture.
The H suffix is part of the exact installed execution. IC200CHS006H must remain separate from the unsuffixed IC200CHS006 record unless Emerson documentation establishes a valid replacement path.
Specifications
| Manufacturer | Emerson |
|---|---|
| Exact Model | IC200CHS006H |
| Product Family | VersaMax Modular I/O |
| Product Type | Local communications carrier |
| Revision Identity | H suffix; retain exactly from the installed label |
| System Role | Carrier position for supported VersaMax communications hardware |
| Required Station Record | Installed module, station layout, wiring and controller configuration |
| Selection Basis | Exact carrier label and validated station compatibility |
Features
Preserves a defined module location and the associated station connection record.
Carries an H revision suffix for controlled maintenance identification.
Supports modular replacement when the module, wiring and configuration are documented together.
Compatibility
- Confirm IC200CHS006H on the carrier and identify the communications module installed on it.
- Record the complete VersaMax station order, network wiring and power arrangement.
- Compare carrier keying, connectors and mounting before attempting installation.
- Do not treat IC200CHS006 and IC200CHS006H as identical without an Emerson-approved compatibility statement.
Replacement
- Save the controller and network configuration, then record current communications diagnostics.
- Apply the site isolation procedure and label network, power and shield conductors.
- Inspect the carrier, mating connector and rail mounting for damage or contamination.
- Fit the H-revision carrier and reinstall the documented communications module and wiring.
- Restore power under control, verify station recognition and prove communications to every dependent node.
FAQ
Is IC200CHS006 the same service item as IC200CHS006H?
They share a carrier family, but the H suffix is a distinct hardware identity and must be matched or supported by Emerson documentation.
What module information is needed when ordering IC200CHS006H?
Provide the communications-module label, station position, controller type, network protocol and full carrier photograph.
What network records should be preserved before changing IC200CHS006H?
Save addresses, topology, termination, baud or protocol settings, shield treatment and the current diagnostic state.
What physical damage should be checked around IC200CHS006H?
Inspect mating contacts, rail clips, keyed features, terminal strain, corrosion and signs of overheating.
How is a replacement IC200CHS006H commissioned?
Confirm station discovery, module diagnostics and stable communications with every controller or node that depends on the carrier position.
About IndustryParts
https://www.industryparts.com/Communications-carrier revisions remain distinct
IndustryParts records IC200CHS006H separately from IC200CHS006 and preserves the installed carrier, wiring and release context.
- H suffix retained
- Base code separated
- Network record preserved
Recommended Models
| TR 100223952 | V1U 2.2 | LIM800 125.165.455 |
| IS23DI0XCD000 | ES915/C | EL2809-0000 |
| MAX3-80002 S90SC2.7S00 | 3HE15377AARA01 INUIAG2HAA | 8B0C0160HW00.001-1 |
| R0-TR500-4 | Novotest 183468 SmartDock Type2 | FH67/G DY90L/B/TH |
| CHT9-Y86DZS-305/TG-SR/CP94/CP95 | Siemens 6SY7010-0AB08 | 909.0262.900 |
| A9MEM2135 | KEB 20F4F3R-4R01 | 1FK7022-5AK71-1HG2 |
| WAGO 280-641 280641 | 363-327 | EM4-101-AA2 |
| GAT546410R0002 | SM9000 SMR21XGXFRKG/US | G50AB045MHAK2C |
| SUPC4 R1D 37900218 | N280-03F | DCM01524 |
| C-BUS2 5500PS | TST8804 | VBUSBASI V2.0 281095 JE |
